GT_maxwell

LINK G4+ with PCB Plugin EVO7 Do anyone know that if we need to change the ignition Dwell time table with customer installing HKS TwinPower Ignition Amp DLi II thx for help

Alright Thx AdamW. Got it... will try to look into the 4D ign Table..

Hi which Ignition table that i should look at for ING vs TPS ( sudden Acceleration by % ), which i have the base Ignition map and at some sudden load ( rpm range ), I will need to add some Timing to burn off the additional fuel which is been upload by the Sudden enrichment on the G4+ plugin Map.. The ECU that we are using is EVO7 PCB V1.5 Plugin

Alright I got the Ideal Admanw... I will try to adjust the ms first before i go for the adjustment for the Master fuel trims.. And thx for the great infor … i will need this to setup the correct fuel setup.. As the customer will soon upgrade to Bosch EV12 Bosch 1000cc or 1300cc injector so, so once i have the information i need i will be able to get the injector setup correct... thx.... :-)

Alright Thx Koracing.. will try on it... Thx x 10000

Thx Adamw... About the Master Fuel adjustment... what actually is the meaning of it on compare to any injector that we are using?? like the bosch EV14 which we are planning to use one day... how about the Master Fuel Trim do we need to make any adjustment to it??

I need some help to setup this injector for my EVO7 G4+ Plugin... Please help how to set up the injector scale as, do i need to adjust the Master Fuel (Ori 12ms) Master Fuel Trim ( 0% ) which increase from 560cc to 800cc injector As i need to key in the detail for the Injector Dead Time (ms) but the Injector which i am using only show from 10v to 15v. Do i need to make change for the 6v to 9v ?? I have already making change for eliminate the ballast for the it so that this can use the High Impedance injector. Thx for helping

tks for the reply. About the injector, from the standard setting I saw in the table are 12ms for the Dead time, is that the basic setting for the Injector but what size injector?

Ya, that's cool Bro. If you can help us with the setup than I am sure we can have find some one to do the final tune for us. As for now we will have to complete the Engine first. Get all the items that need to be done on the engine before we will start with the EMS(LinkEVO3).. I will keep up date of the engine items that we have put in.. than once complete the engine, I will need all the help I can get to set up the ECU.. tks...for your help

Can we use other manufacture Map Sensor other than the Link Map Sensor(internal) for the EVOLink3? Like GM 3bar...etc What should I set the Master(?ms) if I use 850cc injector for a 2.2L 4G63 Turbo. And how to measure if I change to 1000cc Injector in the future...

Tks As for when I purchase the EVOLinkG3, is the unit come with base map(For EVO3)? Is it save to drive with Base map? I have some friend which have Wide Band Sensor with data log, so the only things to do the tunning will be on street, where we need to get a good road which have no car on it. Where we use it to tune the E-Manage Ultimate. O do you have any dealer in Malaysia, what are the requirment to become a dealer? And any help possible with the tunning, when we went into some problem....

O good, When do you know the Auto Tune will come out?

Tks Bro. So I can take away MAF right?. And Need the add the Air Temp too right?. As for the Base Map. Would it be possible That I send out the detail on what we have don't with the engine and than can ask them to do a map accounding to the Spec and Detail that I send out to them? As my area are not easy to find a good Tuner, or any Link Dealer at this area. O do Link provide tranning? please provide the detail if they have provide tranning on how to tune up they ECU(map)...etc

Any one use the new EVOlinkG3 on an evo 3 before?. is the unit come with MAP sensor, and Air Temp Sensor, as I like to take way the MAF for my car.. is the unit come with Base map, any support for some area where not easy to get good Mechanic to tune...etc please send information on what mod is your car.. as I am looking to buy it.. regards Maxwell