neil brown

Has the unlock code been applied If brand new first power up to program it require unlock code supplied by dealer who supplied it

Your location might help you

I couldn't be any further away as I stay nr Glasgow in Scotland

I have one

Fresh tune as software is different between g4+ and g4x Sure you can copy tables over but the admin gods should be along soon

But new https://www.torqen.uk/brands/link-ecu/accessories/looms-and-cables/g1-g4/52777-link-ecu-serial-link-ser.html

https://www.torqen.uk/brands/link-ecu/accessories/looms-and-cables/g1-g4/52777-link-ecu-serial-link-ser.html 100 pounds new

they are not obdII due to their age, as these were out well before obdII was thought off you can see all info on the hand controller if you have one

Friend had dccd pro in his car due to above issue which was tapped into front left abs sensor Speedo would read 20 mph sitting still and bounce about all over the place when driving and also brought on abs fault light which would not clear Chances of it working is slim I'd say as he decided to sell the car in parts to recoup his money

Can't tap into abs as will thro abs code on that wheel Later 6 speed boxes from wrx hatches and legacy don't have a speed signal from box but is done over can from the modules on board See picture with circle is where's the speed sensor is fitted if got a blank then there is no drive fitted for the speedo sensor

Is the plug touching metal as that's the return path otherwise won't spark Do the coil packs require an ignitor separately or have they an ignitor built into to them. Did you set up the dwell times in the ecu . Dwell times 8V 5.34 10V 4.69 12V 3.93 14V 3.40 16V 3.40

put the old pump back in if runs fine with that, check out the new pump and could be a faulty batch

Best try putting this in g4 section

Sg9 sti has DBW and AVCS as well Moonson not suitable as above have stated