Jump to content

Ken Dunkley

Members
  • Posts

    120
  • Joined

  • Last visited

  • Days Won

    2

Ken Dunkley last won the day on April 23 2017

Ken Dunkley had the most liked content!

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Ken Dunkley's Achievements

Newbie

Newbie (1/14)

5

Reputation

  1. Hi- I run an Atom G4+ on an old 6 cylinder Jag and run 3 injectors of 1 drive no problems . So you could run 3 each of drives 1 and 2 . run group fire injection .
  2. Ken Dunkley

    Lambda display

    Hi i have a small problem with displaying Lambda 1 on a digital graph . Ive connected an AEM-x via can and seems all good . I have not started the engine yet . I just want to display Lambda1 on a digital gauge but it seems to default read Average AFR . Even if i request Lambda 1 . On a Dial type gauge the dial needle displays the correct ( as you'd expect) open air reading and it shows two sets of digital readouts within the dial one at high Lambda and one at low AFR . How do i delete the AFR reading/parameter ?
  3. Hi Simon - I emailed sales earlier this week but got no reply . Can you check with them if they received it please ?. Let me know if not and ill resend . Thanks .
  4. Cool- Thanks Adam .
  5. Ken Dunkley

    Jag fuel map

    Hi ive fitted a Link Atom G4+ to an old Jaguar . Can anyone suggest a fuel map as a starting point for getting it running . Ill be using traditional tune and its got 500cc injectors . A starting point for a master fuel number would help also . Its a 6 cylinder 4.2 litre .. Maybe 220 hp std . Thanks .
  6. Ken Dunkley

    Unlock code

    Hi- i bought a Link Atom g4+ off TM about a year ago - i dont think it was ever powered up . How do i go about getting the unlock code for when i do power it up ? Thanks - Ken
  7. Hi- is the Pertronix dizzy a ready to run type like an MSD one or does it require an amplifier box such as a MSD6AL or equivalent ? If it requires an amplifier box then honestly it is so easy to set up the ignition side on the Atom . I have used an Atom G4+ on my Dodge V8 running a dizzy and can say im very happy with it . Certainly the ignition map is easier to set up and tune than the fuel IMO .
  8. Ken Dunkley

    AEM - can

    Just to confirm - Via can -i want to use the AN channels for other sensors ?
  9. Ken Dunkley

    AEM - can

    Hi - can you tell me if the AEM x series 30-0300 wideband is able to connect to the Link G4+ via can ? . Its advertised as having a can output but just checking - Plus how do you rate them ? - Thanks - Ken .
  10. Simon - One more crazy idea - Could you wire two injector drives together ( say 1 and 3 ) and have enough power to drive 3 low impedance in series . And do this twice for a six cylinder and run it in group fire ?
  11. In 2014 Simon replied to a question about running a 6 cyl with a Atom G4+ - "You have to run group. If you have high impedance injectors then wire in two groups of three (one drive per bank will be fine) If low impedance then you will need to do it using all 4 drives drive 1 and 3 firing one bank and 2 and 4 the other." Can Simon please clarify how he would wire up the low impedance injectors using all 4 drives please ?
  12. Ok - Just thought i could take advantage of all the cheap evo or nissan injectors for sale which are low impedance . Just bought a Atom G4+ for a 6 cylinder project and looking at options - From your comments - injectors wired in series is probably not an option . Ta anyway .
  13. So i havnt bought any yet . Just thought id run this by you to see if its a possibility ? Yes 3 in series . How would the math work if they were 2-3 or 4 ohms ?
  14. Hi- i know youve been asked before but cant find any answers . On a 6 cylinder can i wire up 3 low impedance injectors in series and run them off 1 injector drive ? Have 3 injectors on drives 1 and 2 and run group fire ?? Thanks - Ken
×
×
  • Create New...