Stu

awesome, thanks Adam!

sorry mate, I just wasted your time - i just realised i had rubbish data in my open loop AFR target overlay table. i reset that now its all good.

hi guys - I have a cell in my AFR target table set to 0.98 at idle but if I use quick tune the target says 1.28 so it tries to lean it out real bad. What am I doing wrong? Cheers

Hi guys - can mixture mapping be done using TPS as the load axis or can it only be used with a MAP sensor?

4cyl MGB engine, 18V

Thanks Adam. Would fuel economy gains be significant (if I fit a cam sensor) in your opinion?

Hi guys, my car runs great and sits around stoich most of the time. 12-13:1 under full load. Pretty inefficient old motor design but it seems to be using a lot more fuel than I’d expect. Using multi point grouped mode, looks like injector timing can’t be changed unless in single point mode? Unstable manifold vacuum due to cam and Siamese ports - using TPS for fuel map load axis, two injectors feeding four cylinders. Bad recipe for fuel economy I know, but wondering if anyone has any ideas? Thanks, Stu

All good, thank you.

Hi guys, not running a MAP sensor, load axis is TPS for everything else but charge temp table load axis is MGP and I can’t change it - does that matter? Thanks

Sorry Vaughan, only just saw your reply. I don’t even know what that means but I’ll try and figure it out this weekend and have a go. Thanks

Hi guys, can anyone send me screenshots or whatever of the tables in the charge temp approximation help section? Dont know why but I've never had any graphics in the help section (updated latest version, uninstalled/reinstalled etc), really need a visual to help me understand. Thanks.

Hi Vaughan, updated but still the same. Maybe uninstall and reinstall?

ok, thanks Vaughan. It's been like that since day one and I've updated at least once with no luck but I'll give it a go

Yip, still the same.

Hi Adam, I've attached couple of screen shots. The script error one always appears each time I open anything from the ECU settings menu. The charge temp one is an example of anything I open in the help menu - no graphics anywhere. The version I'm running is 5.6.7.3632. I'm using Windows 10 on a Lenovo laptop. Not sure about default directory. I dont even know what that is. I just followed the prompts from the installation wizard. Its ended up here "C:\Link G4\PCLink G4+\PCLink.exe" if that makes sense? Thanks for taking a look. I have managed to muddle along so far like this but would really love it if the graphics were going.