Larsi566 Posted December 22, 2016 Report Share Posted December 22, 2016 HelloI just bought a vw golf 1.8 16v g60 car and I am wiring up the Link g3. there is no spark and on PC link it looks like there is no Rpm signal. i have measured with scoop on the yellow cabel for trigger 1 and it is changing between 5 and 0 volt when cranking but no life on Rpm meter on pc.maybe there is some wrong adjustment on pc link? it is spark when i try ignition test. realy hope someone has some tip for me to try :-) Quote Link to comment Share on other sites More sharing options...
Scott Posted December 22, 2016 Report Share Posted December 22, 2016 You are on the right diagnostic track with finding the problem. The ECU will not do spark until it is reading engine speed.What is the tooth pattern that trigger 1 and trigger 2 see?Please attach your base-map.Scott Larsi566 1 Quote Link to comment Share on other sites More sharing options...
Larsi566 Posted December 22, 2016 Author Report Share Posted December 22, 2016 I found the problem :-) it was something wrong in the trigger setup, sync pulse was set to Cam. but it should be set to None :-) Now maybe its time to celebrate Christmas :-) :-) have been working on this car none stop all week an last weekend :-)Thanks for help everyone :-D and merry merry Christmas :-D Scott 1 Quote Link to comment Share on other sites More sharing options...
Scott Posted December 22, 2016 Report Share Posted December 22, 2016 Good work. Merry Christmas to you too! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.