Adzn3k Posted April 22, 2017 Report Share Posted April 22, 2017 Hi,I know I can use existing ign outputs on the standard loom but i'd like to be able to have the coils on their own loom to an xsloom.I already have an xsloom, 1zzfe coils and want to use the triggers in the oem distributor till my engine is build with Caldina crank and cam triggers, I've had a look in pclink but cant see if I can set the outputs to a certain cylinder.Any info or help would be greatly appreciated.Adrian. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted April 22, 2017 Report Share Posted April 22, 2017 I'm not 100% on this, but I'm pretty sure you will need to use ign 1-4 for the coil on plug conversion.I had a look thru the software, and was unable to only configure ign 5-8.I would set the coils up on their own loom like you said, but have it mate with the standard loom via a deutsch connector or something of the sort. Quote Link to comment Share on other sites More sharing options...
Adzn3k Posted April 22, 2017 Author Report Share Posted April 22, 2017 Looking on the pin out the ign 2 looks to be purge? I've no idea what that's for the pinout says it's blank. The others are egr (deleted) antilag (my car never came with it) Quote Link to comment Share on other sites More sharing options...
Adzn3k Posted April 22, 2017 Author Report Share Posted April 22, 2017 looking on the base map provided with the pclink software it seems the ign 1 to 4 are locked and I cant change the outputs? i'm not with the car at the moment so idealy need to work this out so I don't waste time wiring things up to find its wrong? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 23, 2017 Report Share Posted April 23, 2017 Hi Afzn3K,Yes you must use Ign 1-4. They have been deliberately connected to normally unused pins on the header so users can easily upgrade to wasted or direct spark without buying an expansion loom.Ign 1-4 will be locked in the base map but once you connect to the ECU live and change ignition mode to direct spark then the ignition drives will be reassigned automatically. Quote Link to comment Share on other sites More sharing options...
Adzn3k Posted April 23, 2017 Author Report Share Posted April 23, 2017 OK thank you for the reply, I'll have to make the loom to a new plug in the existing loom and use the xs loom for other things like water meth injection Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.