matt henderson Posted August 17, 2017 Report Share Posted August 17, 2017 I have just scored a link plus ecu in a box of stuff it has 2jz//7m on the sticker.apparently it has been running on a 4agte with a waste spark setup is this possible?It has 2 sub boards in it one for 6 terminal isc which will not be used. Also trigger board? sub24new 120405.will this run with the smallport dizzy 24 teeth on one pickup and one tooth on the other.anyway the story was it ran well but the loom was dodgy as i stripped the loom and they were right dodgy asf crimp joins every where so i am planning to rebuild the loom and fit to my 4age on quads and eventually turbo.Should this do the jobĀ Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 17, 2017 Report Share Posted August 17, 2017 Yes, SUB24NEW is for the toyota 24 tooth + 1 sync CAS/distributor trigger and the link plus will allow you to do distributed, wasted or direct spark on a 4 Cyl. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.