Jump to content

Pierre1357

Members
  • Posts

    5
  • Joined

  • Last visited

Pierre1357's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Hello again and thanks for your help. I have located my problem. It was the shielded signal wire making contact within itself, creating a short circuit. Tps works perfectly. Now to set up my vct solenoid. And tune the new engine.
  2. Sorry, let me answer those questions. 1. Yes the problem just developed. 2. I will look at the run time values after work today. 3. If I clear code it comes back immediately. 4.voltage is froze at 5.00v. Can you tell me which signal wire coming from the two plugs is shorted to ground? It seems that I'm going in the wrong direction. Thanks again!
  3. Thanks for your reply! I am referring to the plug that is not fixed to the tps. The code is anv3 at ground. But when I test the ground, it checks out fine. This one has me stumped. Thanks for your help
  4. Hi all. I'm having trouble with my tps wiring. This is for an r32 skine with rb20det. I have code 17 coming up and my laptop is showing 4.97v Tps main. The code is for tps ground but i have checked my signal ground. (Black wire) i have a good connection at both sides of the plugs with tps connected. Also tried two different sensors. Same results. Any help would be appreciated. Thanks
×
×
  • Create New...