Jump to content

tom-fd3

Members
  • Posts

    14
  • Joined

  • Last visited

Reputation Activity

  1. Thanks
    tom-fd3 reacted to Adamw in Link extreme and Dash 2 connection issue   
    No, connect the speed sensor to any digital input 1-8.  Assign the DI as LR wheel speed and adjust the calibration number until speed reads correct in PC Link. In the speed sources menu, set both driven and non-driven wheel to LR.  You will not need to connect anything else to the dash, the wheel speed will just be sent over the existing CAN bus with all the other ECU data.
  2. Thanks
    tom-fd3 reacted to Adamw in Link extreme and Dash 2 connection issue   
    You might be better to connect the speed sensor to the ecu rather than the dash.  From memory the Dash 2 only works with Hall effect speed sensors and I suspect the FD is reluctor.  The ECU will accept either type and send speed to the dash over CAN
  3. Thanks
    tom-fd3 reacted to Simon in Link extreme and Dash 2 connection issue   
    Form the side you are attaching the wires to 
×
×
  • Create New...