Jump to content

Booston

Members
  • Content Count

    36
  • Joined

  • Last visited

Everything posted by Booston

  1. Booston

    Target afr protection

    Any detailed info would greatly be appreciated. Had some very worrying lean condition without any way of knowing until logs checked !!!!!!
  2. Booston

    Link ecu on a tablet

    Only tablets with double USB ports
  3. an update changed my windows ( 8.1 to 10 i think ) but ever since all my parameters for display had set to zero and terminology changed saying soft and hard! also now my lambda has 3 decimal places! any global fix? tried getting windows 8.1 again but nothing. also you can see oil pressure is alarming at 1psi when the high warning value is above ! ?
  4. Can this be wired direct to an input ?
  5. Booston

    Target afr protection

    No takers ? Seems like a basic function to have ? An oem ecu would at least put CEL on if adjustment was beyond normal! ?
  6. Can anyone think of a protection strategy for being out of target AFR by a percentage greater than ? i.e if clamp at 8% then at 10%+ fuel cut or other Tia
  7. Hi I cannot get Aux 4 on car pin 55 to change state ! i noticed in function list “nc”! Is that not Not Connected? Not Configured?
  8. Can you choose the x axis parameter instead of log time ? rpm would be very useful
  9. Has anyone ran PCLink on a raspberry Pi? or is there a Linux link version ?
  10. Booston

    Fuel level

    What are the most common types of sender ? 4-20mA or ? looking to get this into the ecu then on to CAN for dash display . Easy done ?
  11. just a bit confused here having logs when seemingly condition not met! so are the 4 main Conditions ALL must be met or any one? and MAP will not allow value lower than 0 but might want logging to start just above idle vac! -30 say! how do you set that. why does the timeline have a minus value! can this be changed to a date/time? Tia
  12. When I first looked at protection method I was surprised not to see it as described above. Below set point against rpm = cut simples
  13. Booston

    Graph trace

    Ya bugger I found it. In pc log setup . Auto or time in secs ! Thx
  14. Booston

    Graph trace

    How bizarre it certainly doesn’t do that on mine ! ill get a vid/ screen grab
  15. Booston

    Graph trace

    yes live view doesn`t display as yours does feel free to steal the Dash layout ;-)
  16. Booston

    Graph trace

    full screen white dash plus timeplot start pc log.llf
  17. Booston

    Graph trace

    That’s exactly what I want. I wonder why mine isn’t like that! setting ?
  18. Booston

    Graph trace

    Here is a time plot and 3 pulls of boost showing steady boost but that is zoomed in to a log around 10-15secs of window on the graph y axis of roughly a 3min log. I want to see that constant 15sec y axis live instead of the graph concertina the data to the left eventually reducing the resolution on the right. I know it’s splitting hairs and can be done after but I need live view. tia
  19. Booston

    Graph trace

    If you’ve seen the Apexi avcr boost controller trace that’s what I’m after
  20. Booston

    Graph trace

    Hi Adam yes in time plot but time plot is all of the data it’s just squished to the left but the longer the log the less resolution you have. I know it can all be in very fine detail when looking at logs but I wanted to see a trace live
  21. Booston

    Graph trace

    Any way to watch a trace with a 5 sec window? I.e in the graph I don’t want to see the trace from it’s start and it builds the timeline. I only want to see data upto 5secs old. So data 6 secs old should off the graph to the left. tia
  22. I’ve shared a llf with someone and when he tries to load pclink says the file is encrypted to another ecu ! ?
  23. Booston

    Boost trace log

    What’s the way to view a boost trace v rpm in a graph form ? Like a dyno graph boost trace tia
×
×
  • Create New...