Booston
-
Posts
64 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Booston
-
-
Thanks Dave
-
How can I change the displayed decimal points ?
-
Any detailed info would greatly be appreciated. Had some very worrying lean condition without any way of knowing until logs checked !!!!!!
-
Only tablets with double USB ports
-
an update changed my windows ( 8.1 to 10 i think ) but ever since all my parameters for display had set to zero and terminology changed saying soft and hard! also now my lambda has 3 decimal places!
any global fix?
tried getting windows 8.1 again but nothing.
also you can see oil pressure is alarming at 1psi when the high warning value is above ! ?
-
Can this be wired direct to an input ?
-
No takers ? Seems like a basic function to have ? An oem ecu would at least put CEL on if adjustment was beyond normal! ?
-
Can anyone think of a protection strategy for being out of target AFR by a percentage greater than ?
i.e if clamp at 8% then at 10%+ fuel cut or other
Tia
-
Hi I cannot get Aux 4 on car pin 55 to change state !
i noticed in function list “nc”!
Is that not Not Connected?
Not Configured?
-
Can you choose the x axis parameter instead of log time ?
rpm would be very useful
-
Has anyone ran PCLink on a raspberry Pi?
or is there a Linux link version ?
-
Fuel level
in G4+
What are the most common types of sender ? 4-20mA or ?
looking to get this into the ecu then on to CAN for dash display . Easy done ?
-
just a bit confused here having logs when seemingly condition not met!
so are the 4 main Conditions ALL must be met or any one?
and MAP will not allow value lower than 0 but might want logging to start just above idle vac! -30 say! how do you set that.
why does the timeline have a minus value! can this be changed to a date/time?
Tia
-
When I first looked at protection method I was surprised not to see it as described above. Below set point against rpm = cut simples
-
Graph trace
in G4+
Ya bugger I found it. In pc log setup . Auto or time in secs !
Thx
-
Graph trace
in G4+
-
Graph trace
in G4+
How bizarre it certainly doesn’t do that on mine !
ill get a vid/ screen grab
-
Graph trace
in G4+
yes live view doesn`t display as yours does
feel free to steal the Dash layout ;-)
-
-
Graph trace
in G4+
That’s exactly what I want. I wonder why mine isn’t like that!
setting ?
-
Graph trace
in G4+
Here is a time plot and 3 pulls of boost showing steady boost but that is zoomed in to a log around 10-15secs of window on the graph y axis of roughly a 3min log. I want to see that constant 15sec y axis live instead of the graph concertina the data to the left eventually reducing the resolution on the right. I know it’s splitting hairs and can be done after but I need live view.
tia
-
Graph trace
in G4+
If you’ve seen the Apexi avcr boost controller trace that’s what I’m after
-
Graph trace
in G4+
Hi Adam yes in time plot but time plot is all of the data it’s just squished to the left but the longer the log the less resolution you have. I know it can all be in very fine detail when looking at logs but I wanted to see a trace live
-
Graph trace
in G4+
Any way to watch a trace with a 5 sec window?
I.e in the graph I don’t want to see the trace from it’s start and it builds the timeline. I only want to see data upto 5secs old. So data 6 secs old should off the graph to the left.
tia
Target afr protection
in G4+
Posted
We tuned whole map and all was good with CLL either not having to make any corrections to any cell or very very little. Something went bad with fuel pump and CLL tried to correct as it should but either reached it Max correction. So in that scenario a safety set at say 5% or more correction doing something else, pref rpm limit plus CEL.
to update mapper did find away to protect as above excessive correction equal rpm limit plus cel