Ian6

Guys, Thanks for you feed back. @ Clint you have a private message.

Had a go with the accel setting but the flat spot still persists. Map file attachedG4+ Evo rev 1.pclr Any help is apreciated

Hi, The log is on idle static however the accel load axis is set up on MAP, I will have a look and get back to you with an update. Thanks for the help. P.S. the onboard MAP sensor plumbed individually.

Hi, I wonder if some one could help me on this issue? I am experiencing a sudden flat spot while pressing the throttle various times consequently. it seems that the MAP sensor is not constantly responding quick enough. The log attached shows what is happening on the second throttle opening. Any help is really appreciated.Log 2019-03-7 1;23;09 pm.llg

Hi, managed to set up the the non driven wheel as speed source and it is working fine. Thanks for you r help.

Hi, Thanks for your replies. I have already adjusted the disarming speed and the TP low but there is no change. Below is the RPM table however the problem is that I am no having a Non driven wheel reading as I have only set up the LF wheel speed. Could assist me in setting up the Non driven wheel? Thanks

Hi, I wondered if I could get any assistance from any one on this forum. I have a G4+ in an evo and I cannot get the LC to deactivate when not needed. I is still activated on idle (0% TP) and won't disarm after the set RPM limit. Thanks