Denmark

Thank you , I got it working

I now Got speed showing and calibrated to show the right speed , when i open a gear gauge it just stays in first , so it does not know what gear im in ....

Hi All Im trying to setup boost by gear, but cant get the speed input working Speed input from a dccdpro vss is used to make the speed signal, and its connected to DI3, can anyone see what the probelem is ? I belive if i open a gauge showing wheelspeed or HZ that i would be able to see the something on the gauge, and its not showing anything with this set up Anyone ? Thanks steffenrallybilrev10.pclr

Perfect Thanks , i Will give it a go

Hi All I have a 2007 impreza sti rallycar that im trying to set up antilag and im having some trooble getting it to work ( general setup i presume) when table 2 is active i cant control that with the pedal, so it will run what i set as 0 in tps , can someone help to get the anitlag working ? i have set D11 to activate table 2 , and this is also D11 that the switch to turn on antilag is setup to Thanks Skassa steffenrallybilrev8.pclr

Im trying to get Als working on a subaru with E-throttle , but i Cant find anywere i Can get a table 2 so i Can get it working , anyone Can let my know how to activate table 2

I have just had my costumer send me a picture of the ecu thats in the 2005 Forester xt 2005 not faceliftet , and without secondary airpump setup , this is the ecu 9Z 22611AJ590 its just if the online

with the 2005 Forester xt edm i Can find online , it seems to be the same as the wrx104 link , but in the link manuel i Cant see the power and grounds , but if the wrx104 link cover the versions around the World it seems to be a direct plug in

Thanks , i have found the ecu pinout from a 2005 Forester 2.5 xt edm , so i Will compaire before buying , thanks skassa

Hi all , have Any of you used a plugin link for a Forester instead of a wrx ? I Got a 2005 Forester 2.5xt that Will have a built engine and i would like to use a link plug in , im thinking i Can use a wrx104+ wrx 2004-2006 plugin ecu and then hopefully someone Can point me to what wires that needs to be swaped if Any , for the link to work out of the box let me know if anyone hot Any info before i buy a ecu for my costumer thanks skassa