Attached is the rom I used to try and troubleshoot the trigger issue.
I was able to match the locked ignition timing with that of the pulley (15 degrees) with fuel injection off. I did not get any trigger error counts.
With the same setting and holding 3,000 rpms at this point I tried to play with the delay but I couldn't get it to come anywhere near 15 degrees.
Also, there are no trigger error counts when the car is idling or when I hold 3,000 rpms.
Under a different rom that I used to move the car around, I have challenges firing up the car below 40 degrees ECT or the car staying on (suspect my Idle Control Solenoid is messed over and above the trigger issue,) jerking from the car below 1,500 rpms and misfires post 6,400 rpms. Only point where I get the trigger error counter to increment is on WOT post 6,400 rpms (2 per Wot pull.)
Base timing set with fuel off log no error count.llg
Trigger Test Rom.pclr
3000 rpm hold with base timing set.llg