Jump to content

a96bimmerm3

Members
  • Posts

    3
  • Joined

  • Last visited

Posts posted by a96bimmerm3

  1. On 2/22/2019 at 6:51 PM, Adamw said:

    Correct.

     

    Correct.

     

    Set type to signed and use an offset of -50 should do it.  

     

    Adam thanks so much, it all works perfectly. The only thing I needed to do is do a multiplier for lambda rather than a divider.  Got coolant temp and map sensor working great too.

     

    Does adding a can stream or two use much horsepower from the Link ECU or is it pretty much a non issue?

  2. 15 hours ago, Adamw said:

    That message above would look like this.  Send it a 500Kbit, 50Hz transmit rate, extended ID = 32546820

    Pn6DROh.png

    Thanks Adam! Is the extended can ID (32546820) just decimal of hex 0x01F0A004?  Just trying to figure it out so I can add other parameters and understand a bit more. Thank you!

     

    For example, there's another can message ID of 0x01F0A000. 

     

    Would I be correct in assuming the CAN ID would be 32546816? And how are the IAT and Coolant Temp data handed on that one? 

    Screen Shot 2019-02-22 at 2.53.12 PM.png

  3. I wanted to know if you could guide me on how to add other channels to this like map pressure/boost, etc.  I have access to the AEM can info, I'm just not experienced enough to know what to do with it.  Here is a sample from the data sheet.  

    Thanks!

    Josh

     

    Screen Shot 2019-02-21 at 7.36.45 PM.png

×
×
  • Create New...