KME36

Hi Everybody, I've been lurking the forums for quite a while and found the information here very useful. That said, i have a little problem with my current BMW M54, swapped into an E36, and couldn't find any information on this. Engine is a M54B30, but vanos has been converted to single vanos to make it look like an M50. I have used a timing light to align the trigger offset angle to the mark on the block, and tried adding 360 degrees to it as well, but car still does not start. I have uploaded my base map for your kind perusal. If you guys have any idea why the car is not starting please give me some advice! Thank you. Kevin Dylan m50b30.pclr

Thanks so much!

Hi guys, I have a 1993 BMW E36 with a M40B16 engine (Single cam) 1.6 I just got my link G4 storm (Silver) wired in last night and need your help with a few things. My injection type is multi point group or batch injection, therefore injector 1 and 3 is a single wire, wired to 1 drive and 2 and 4 is wired to another. My concern is that.. Injector drive 2 is faulty and is unable to output any signal, therefore I wired the injector 1 and 3 wire to Injector drive 1 and 2 and 4 wire to Injector drive 3. Active drives were set to INJ 1-4 Would this cause any concerns? LINK manual said it was recommended to wire in odd and even drives. Thanks so much Kevin