Ranbie

Evening, I'm trying to fault find an AEM COP on my Link G4+ for a B18c. The issues I'm having are; -No timing light pulses while cranking. -A flat 4.3v trigger scope event. -No RPM signal. What I've checked; -Coil Test. (all work fine with timing light) -Confirmed all pins on sensor side are correct. -All pins on ECU side are as per Adamw's Illustration from another topic. I have consolidated every reference that I've been able to find on these forums to help me but I'm still unable to get a normal signal on the scope. Will continue to look for anything out of the ordinary but would appreciate some help!

Thanks for confirming that! I will be running K20 coils with in-built igniters.

Morning, I'm wanting to wire in a T1 Race Cam Trigger system for a B18C and completely remove the factory Distributor. Can the ignition coils be run straight from the ECU ignition pins or do they have to be routed through a CDI box. Cheers,