Jump to content

leon36

Members
  • Posts

    9
  • Joined

  • Last visited

Everything posted by leon36

  1. Hi, Just checking if a v88 is capable of receiving lambda data via can bus while sending data to a racepak dash. Thanks
  2. Hi Adam, Managed to get them to talk to each other. Used the link cable. After cutting it open I found different wires in number and colour on either end. After a fair bit of measuring I located the can h/l (which were opposite to the help file) connected them up, reread vnet and now I have data. Now to start what looks like a long and laborious task of configuring each channel. One of the new link dash's is still on the agenda. Thankyou very much for your assistance with this, I will be nominating you for a nobel prize.
  3. Could we possibly do that team viewer thing so you can have a quick look?
  4. Yes, i get all the channels, just no actual info. i can change the information or parameter that is displayed, but everything is just 0. If that makes sense. I can have the engine running and see oil pressure on VTS, however the dash display is 0 with both cables/modules even when strictly following your instructions for the vipec module. I have personally seen this control unit display info on a motec dash so i am sure the vipec is outputting info. Im almost positive this is operator error so i really appreciate your assistance.
  5. Went and bought a new serial to usb adapter, this has solved the blue screen issue. Still no data.
  6. Thanks Adam, uploaded that map to my ecu. Now when I try to read vnet my computer blue screens. Tried 3 laptops all the same. no idea now. Thanks for your help anyway (security kernel failure) no idea what that means wiil have to find an it wizz now
  7. H Adam Had a guy around today that thought he could fix it, still not working. we have done read vnet thing still no data. Im happy to just use the vipec cable at this stage as it is currently installed. I have heard stories of cutting wires inside the control unit to make something work so today i slid the board out to check and no wires have been cut or removed. ill have a go at attaching my file now. bmw83e85.pcl I cant be 100% sure that the link cable is functional as it has been modified at some stage as there is a dtm 2pin connector inline.
  8. Hi Simon Thanks for that, i have set as suggested, i the transmit format available as well and have set that to sequential. Now that i look at it the module i have is 230-VM-EFILINKC SN:501520 LINK G4 CAN INTERFACE No luck yet
  9. Is there any chance that someone may be kind and generous enough to help me with some guidance on how to get some data to display on a racepak IQ3 non logger from a post 10000 ser no G4/V88 (actually v88 but i was told they are the same as G4). To be honest i dont really understand the settings on either software and i find the Racepak datalink especially confusing. I have a module from Racepak that says for G4+ and i have been told that this is correct, i also have a Vipec module but had no success with that either. I must have wasted days on this so far and i'm nearly ready to throw the Racepak away. Thanks in advance
×
×
  • Create New...