Jump to content

Swampy433

Members
  • Posts

    9
  • Joined

  • Last visited

Everything posted by Swampy433

  1. It doesnt matter because Ive only got 1 CAN device, I just moved it. Thanks for the info though
  2. Well that cured the problem! Unplugged it, and the ECU connected no problems, plugged the CANLambda into Port 2 and can still connects. Thanks very much for your help Adam. Is there a fix for this?
  3. OK Ill try that, the tuner didnt check his lap top, but I can get a pic of mine.
  4. Further to. above, yes the CAN Lambda is connected to that port
  5. It is the Supra plugin, Ill double check the Can 1 port later on and no, nothing shows in device manager other than an error for USB device is faulty
  6. Problem: Can't connect to ECU from computer. When using "auto" I get an orange box and "searching" but never a connection. When using manual and trying to connect I get a red box and "Offline." and the cannot connect error box. The ECU has been in the car for a couple of years, Ive been able to access it on regular occasions during that time, last time was about a month ago. The weekend when my tuner came to map it, he couldn't connect. My laptop which I use previously also cant connect. The blue ready light is on, the car starts and tries to run as it always has, just cant talk to the ECU, what could have changed? Deleted and reinstalled the PC Link software, no change.
  7. It's ok, sorted it now. Turned starting enrichment down and lowered the master fuel trim, starts on the button now.
  8. I've installed my Supralink G4+ in the car, powered it up, installed the Supra base map. Spec - 880CC injectors, 264 cams, Link knock sensors, stock MAP currently but will be fitting an AEM 5 bar sensor. Problem is it turns over, tries to catch then floods, it has run briefly but was very rich. I just need to know what to adjust to achieve a start, fuel trim etc. Cheers
  9. Swampy433

    Swampy442

    I've got a G4+ Supralink, can you use stock knock sensors? I've got a Link knock sensor but the stock loom has 1 pin, the Link one has 2 so how do you wire them in? Also Ive got an oil pressure sensor, its got a 3 pin plug but the stock loom has a 1 pin plug so how do you wire that in? Cheers
×
×
  • Create New...