Jump to content

S116ukr

Members
  • Posts

    9
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

S116ukr's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. hi mate here are the two files think the anti lag is digital input 3 on the ecu glanzamap-mj-stradalinkon-antilagon.pclr MXS 1.2 Stradaglanza.zconfig
  2. Hi, ive got the link monsoon running on my 4efte, one of my digital inputs for the ecu is controlling my anti lag, ive also got the aim strada mxs 1.2, Just wondering if there is anyway i can have the digital input display warning messages on the strada, Ive tried to get the digital inputs showing on the ecu stream but cant seem to work it out, Anyone know if this is able to be done? thanks in advance
  3. ignore the analogue inputs from the ecu i was being retarded , Just the fuel issue that im having now
  4. Hi ive had a quick scout around on the forums to try and find the answers to these questions dont seem to have any luck... Firstly i didnt know if it was at all possible to show the readings from my analogue inputs from my g4+monsoon on the aim dash and if so how to. For example i have a plx wideband wired into the ecu through one of the inputs. Secondly ive wired in the required resistor for my fuel sender etc to read on the dash, i appear to have it reading somewhat correctly in that it is showing -23 litres on my dash however im a little confused as to why its showing the - minus signal before the actual litre reading, any ideas?
  5. yeah shortly after posting my last response i tried the firmware and that was it. Thanks for your help
  6. yeah all configured and ive picked a load of read outs to take from the ecu. so in race studio 3 for the dash, in the ecu stream ive clicked link ecu and then Link-Can_bus__base_LCC ive also ensured that the 120 ohm resistor tick box is ticked.. In the link g4 software for my monsoon i have done whats stated above the only thing i can think is the can cables between the ecu and the dash but ive checked them for continuity and there is and thats between. pins 8 and 9 on the dash plug and 28 and 29 on the monsoon ecu plug so im really at a loss as to what the issue could be here? Anyone have any ideas?
  7. brilliant thank you ive got all that done however the dash still doesnt seem to be showing any of the relevant information... the wiring is all as it should be so im a little confused.... The only thing i can think is maybe the wiring from the back of the strada dash its self i have the can h and l from the ecu connected to the following Can H from the ecu is connected to pin 8 on the back of the strada dash labled can 1+ Can L from the ecu is connected to pin 9 on the back of the strada dash labled Can 1- I presume these are the correct terminations...
  8. Hi all just looking for a little help, Ive managed to find some information online but just looking more for possible verification on a few things and just generally some help... So ive got a toyota starlet glanza v running a link g4 monsoon, Its all in mapped and running, So now ive been and bought myself the strada 1.2 street, So im just looking for some pointers i think ive got most of the wiring sorted. So the 14 pin plug i have sorted, Pin 1 to my power source Pin 2 to a ground Pin 8 to the link can H + connection Pin 9 to the link can L - connection Im pretty sure ive got that correct Now for the analogue inputs for the indicators and head lights etc im pretty sure ive got them all correct as ive found the relevant cables on the back of the existing cluster, My only real questions are, The water and oil temp im guessing ill get sent via can do dont need to worry about them from the back of the cluster, The fuel is the only one im not so sure about as do i need anything in line for it to work or can i just connect directly to the fuel cable , Also is there somewhere within the pclink software with my map that i need to turn the can connections on or anything. Any help would be greatly appreciated thanks
×
×
  • Create New...