hey same problem but on a 4age with itbs car was running fine then just stop i have checked the crank angle sensor reading 200rpms vac and temp all reading ok also check with a light at injector plugs with all plugged both sides gets power and with them unpluged only one side of the two pin plug gets power then when crank i get no pulse i also noticed in my wirring from inj 1 and inj2 they have a big resistor wired in each line iv had this car for 3 years now but its only stopped working yesterday! also have checked the ground on the manifold i under stand that these ground out internally via a switch that runs to the manifold and i have opened it up and cant see any burn marks on anything cheers any ideas what to check next?
http://1.bp.blogspot.com/-IOs7Dl_V508/VFwriSGi_1I/AAAAAAAABLc/-LkQg1Fd0AY/s1600/pinout.PNG