[Trigger 2 noise]

Many thanks Adamw for your help, purring like a kitten now. 

[Trigger 2 noise]

Many thanks Adamw, air flow balance is good and idle is nice and stable, will load those tables this morning, 

[Trigger 2 noise]

Many thanks Adam, the 5l engine has a 347 stroker kit, the firing order is 351  as per custom cam grind specs,  traction control noted. FP noted.

yes ITB's, 48mm, home made when I had a bit of spare time a few years ago,  will set the arming threshold in the morning and see what happens

[Trigger 2 noise]

Hey Adam,

Thanks for the quick responce, I am not seeing any errors, mind you I am very green at this.

The coils are ls1 and they all tested on Ignition test, the log was created when I created the scope image. 

sven ford 347.llg sven ford 347.pclr

I just checked the arming threshhold, its set very low

[Trigger 2 noise]

Can anyone tell me if this noise on my cam sensor will cause misfire   and backfiring through exhaust and generally running like shit. its on a new windsor 5l setup running  8 coils. Engine starts easy.

[Falcon 5L cam and crank sensor connection?]

Thanks Simon

[Falcon 5L cam and crank sensor connection?]

Can anybody help me with pin identification on these two reluctor sensors for a 5L AU engine

[Voltage regulation]

Has anybody managed to crack this one yet, I'm having the same problem with a 2016 mazda alternator?

[Traction Control trigger wheels]

what sensor were you using on the wheel studs Iecku ?

[Matching wire for flying lead harness.]

what is this ADSS'.  you speak of ??