Focos wrc

Ok cool, will try it. I assumed you would have seen it all from my original file

Hey If I put my original on it all works fine. But just noticed on yours my can set up for the toucan is missing...the toucan does have anti theft set up on it....

Hey Adam, you see any issues on there? Thanks

Update Got the car running and tb working ok on original map. Attached is a log of the files you sent. Before I even try to fire the engine protection is on...then when crank both fuel and spark limit 100% egt log non fire.llg

Hopefully this is enough. Not fired car but worked the pedal ethrottle error.llg

It was working fine. Had the sensor out to make a new bracket. Put it back in. Re calibrated And now the issue. I may have dropped the sensor when it was out, cant honestly remember....

I think I may have found the issue. Noticed when trying to recalibrate the aps, the two lines for main and sub which I assume should go up and down with pedal movement when setting it up. They are completely erratic and are all over on the press part Then on the release they barely move whatever I do with the pedal. Would I be right to assume the pedal sensor has had it? Also noted the tb on tps calibrate, it does what it should. But when in test mode and moving the pedal the butterfly will only open not even half way... This could be why on your file it was in engine protect?

Hey I would love to send a log but I have a new problem I hope you can solve. For some reason my ethrottle has stopped working now. I went to recalibrate it as I had replaced the pedal sensor bracket. Now unless I am in set up mode the tb wont move.... If I try and calibrate the tips it does it but still wont work. I noticed during the calibration the values are alot different to what I see when pushing the pedal afterwards. Try and set it up manually and it doesnt like that at all.... sandy after wiring, no tb.pclr

Hey Sorry to bring this back. Although these do show on my dash, for some reason this file seems to stop the engine from firing and the engine protection is 'on' Reloaded the original file and it's fine.... Any ideas?

All seems to be working fine. Cheers Adam

Hi Please see attached files. Would it also be possible to do the same for coolant pressure too please? Many thanks Joe Sandy complete.pclr MXS 1.2 Strada Joe.zconfig

Hi That's great. I will get them over later this eve. Thanks again

Hi Anyone know how I can get egt info to be sent from my link fury so I can display it on the mxs strada 1.2 dash please? Cheers

Will give it all a try. Struggling with battery power now. Think it may have had enough so will try my spare and order a new one if need be. I will also pull the dizzy and remove the lug which comes closest to the crank missing tooth. Happy new year

This looks better now.

Morning. Yes I had press capture. Or do you click whilst its cranking? I clicked before cranking. That's all I seem to get everytime. If I try with fuel it either coffs and stops or had it back fire once

I had planned to take the lug off but was trying it in the duratec vct setting first but no joy. Hoping may get a better understanding before I remove it. Had big back fire once but keep getting trig1 error counts. Scope just isn't looking like expected so not sure if issue elsewhere

Cosworth yb. 36-1 Ford escort cosworth crank (90 before tdc) Phase is via distributor. Currently with both (2) lugs still present

Anyone able to advise. Cranking engine and this is the trigger scope I have got. But it seems hit and miss. Not tried to fire with fuel yet. Just seems very odd to me but I am very new to this so trying to learn. Many thanks

Thank you chaps

Hey That's no problem. Any idea where or to send it too? Cheers again

Hey Anyone able to help out. I need an unlock code for my new ECU. Dealer I bought it from is new and not been asked it before and now with xmas break looks like I will be waiting. Anyone able to assist in anyway? Cheers

Brilliant Thanks for the info

Well all bits have arrived other than my loom at present Just few more questions about above I plan to wire the aim dash to can2 connections. How would I connect the toucan and be able to have the control via it without causing other issues. Read about problems having the 6 pin plug connected for the toucan and trying to use tuning cable at same time.... Is there a way to connect the toucan hard wired and still be able to use all its functions? Many thanks again

Perfect. Thank you. Once it all arrives I am sure I will have more questions.