BRD
Members-
Posts
9 -
Joined
-
Last visited
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
BRD's Achievements
Newbie (1/14)
0
Reputation
-
ok update, with the wide band on its own power feed for a different batter it seem to work fine , like i need to fit a capacitor across the 12v and earth to the feed on the wide band
-
i need to take a log of whats going on, but read on another post about may be needing a capacitor on the power and ground. im going to try it on its own power feed and see if that works . im still new to all this so learning as i go, so not the best with how to find things and set thing up on the ecu
-
still having no luck with the Link can wide band, different sensor fitted and still keeps dropping out as soon as i rev the engine and when get to certain temp, any 1 have any ideas?
-
thanks think i need to check the power feed but the rest i have done,
-
hello hope you can help? i have fitted the Link Can Lambda but having a problem, its all fitted to my Celica Gt4 ST185, from what i can see every thing should be set up with with the sensor and the Link G4+ ecu, i can start the engine no problem, the O2 sensor will read fine, but then as soon as i rev the engine the it stops reading, let it idle and it will then come back and read again, but every time i rev the engine it drops out, the other problem im having is when the sensor get over a set temp it then all so drops out and will not read, would any 1 have any ideas? thanks
-
thanks need finish the wiring for it and will go from there, thanks for the help
-
BRD reacted to a post in a topic: Spartan 3ADV CAN Wideband connection issue
-
hi mate how do get the new FW? and how do it update it all? if i do this is will work ok with the G4+ im fitting it to a 3sgte with 1200cc injectors
-
BRD joined the community
-
this is a bugger as i just got 1 of these and half way thought fitting it, so it wont work the the Link g4+ then?