Funwithmonkeys

It comes with multiple faces and It has a analog output to go to an ecu. I ran the car from 40F to 210F and added a bunch more data points. It reads within a couple of degrees the while way. It seems to be a pretty linear output. I have contacted AEM about getting a calc table for it. Thanks for the help Adam. 30-4402.pdf

It is a AEM 30-4402. Thee was no calc table with it so I added those 2 using a multimeter and reading the gauge. I can just add in more cells and get it to extrapolate if that is the problem.

datsun 510 march 2024.pclr It is a standalone. I have a AEM water temp gauge that is reading the same as what is showing on real dash within 2c.

Hey guys, I'm using a Atom II and I am having an issue with it not reading the correct temperature in the ECU. The Highest it will read is 77c. If I adjust my fan to turn on at anything over 77 it will never turn on. The gauge in PC link rises correctly till 77 and then just stops. if I attach my tablet with real dash I can see the temp continue to rise. Is there a setting I am missing somewhere? thanks in advance

It has been a while since I have been on here. I am looking for some help setting up an Idle air control valve. The installation is pretty simple but I have no idea what I am doing with the setup in the Atom II. I have a 4 wire valve. I have a webcom WID060 valve sold by Jenvey. https://www.webcon.co.uk/products/13320-idle-motor-with-housing/ I currently have only one aux available so I will need to change either my fuel pump to a switch or my tach to another source. I have attached a copy of the current setup for reference. 510 current aug 2022.pclr

Well I finally found a cable that works. This is working with a Samsung Tab A 10.1. It charges and connectes to the ECU at the same time. https://www.amazon.ca/gp/product/B081KTQF9Z/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

I have been using the realdash for about a month now and I love it except for the fact that I cannot have it connected and charge it at the same time. None of the OTG cables I have tried work and from what I have read you cannot use bluetooth with the Atom ecu. Is the only way to wire power directly into the tablet?

I have the same issue. I have 2 different y cables that won't charge and link to the ecu. They either do one or the other.

I was having the same issue. I ended up trying 3 different cables. the 3rd one worked for a bit then stopped. It started to work again after a restart of the tablet. It is making me was to try using a bluetooth connection.

I have read through this post and realdash sounds like a good solution. Is it able to be used with the Atom II yet or is it still in the works?

IT'S ALIVE! AFR is in a good range. I just need to toy with the timing a bit more to smooth it out but it runs. Thank you to the legends who helped me out.

That was it. Thanks. Now I can actually see it change. You are a legend. Thank you

I have done that and set everything to zero but after clicking done nothing changes. They stay with the previous settings. I have also tried doing a save to ecu and the settings still stay the same.

I am trying to do this but it shows the settings locked. I right clicked and tried to unlock but they just stay locked.

Thanks again Neels, I am attempting to go through the calibration procedures and it will not let me adjust the base timing. It appears as thought the settings are locked. I right clicked and hit unlock setting but the lock stays and I cannot change the settings.