Jump to content

Nashar

Members
  • Posts

    3
  • Joined

  • Last visited

Nashar's Achievements

  1. I have link g4+ monsoon ECU I am going to check the trigger wheel and the sensor one more time maybe I could reach a better fitment. The only way I could fit everything together well is by installing 4g63 oil pump
  2. This sensor is flipped to fit, it couldn't sit like it sits in the evo. It's has like 2 lips and the blade slides between them, if you look at the hidden lip in my picture which is visible in your picture you will find that the blade goes in for about the same length
  3. I need help to start my 4g69 mivec I grinded the stock crank trigger gear from 36-2-1 to 12-1 and I was planning to run it batch fire, only on crank trigger. This setup works on another car with the exact same engine and trigger wheel but different ecu, with Link ECU it reads 1000+ rpm just cranking with starter motor. I tried playing with all the settings, no hope, so I decided to switch the whole trigger setup to mitsubishi evo by installing the cam and crank trigger gears from 4g63 also cam and crank sensors from 4g63 and applied all the evo 7 trigger settings from the ecu help manaul. Now when I open runtime values when cranking, Trig1 and Trig2 are highligted green and (yes), trigger error keeps counting and the rpm doesn't rise above 0. I need to start the car with either 4g63 setup or the old 12-1 setup and if anyone knows another different way to start this engine I would really appreciate the help. attached are pictures for the two triggers.
×
×
  • Create New...