Jump to content

borb

Members
  • Posts

    6
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

borb's Achievements

Newbie

Newbie (1/14)

1

Reputation

  1. I was using the wrong software. I was under the impression it was a g4+ ECU, as that is what I ordered, and that's what the instruction manual listed it as. It's a g4x ECU. Waiting on the unlock code now, but, the ECU is able to communicate with the PC now.
  2. The McAfee wasn't doing anything but I removed it to be sure. Starting from scratch (software/driver uninstall), I installed PCLink, skipped the driver install and go through the drivers you just sent. I plug in the ECU, power off, and it shows up under "Other Devices" in device manager with the message "The drivers for this device are not installed. (Code 28). There are no compatible drivers for this device." I've tried every variation/option I could think of that follow the correct sequence as per the installation manual. Everything I do has the same result. All 3 PC's have the same result. I've also tried 2 usb connectors ( the one that comes in the box, both brand new).
  3. I only have the usb ecu port if i manually install it through legacy hardware. If I do the traditional install, including driver, I don't have it in my device manager.
  4. I have a WRX2 G4+ and i'm unable to link the ECU to the PC. I've tried 3 PC's, all running Windows 10 64bit. After installing PC Link i'm not seeing anything in device manager. When i plug in the ECU it shows "Link ECU", which is listed under other devices. When i manually install the USB drivers, nothing happens. When I add the "Link Engine Management USB ECU" through legacy hardware, it has the yellow triangle next to it. I've tried legacy PCLINK software, i've tried running the Silicone labs USB driver. Ive tried getting PCLINK to communicate through the assigned com ports with all the baud rates. Every PC i tried did not have ports under device manager, even under hidden. Other than that I've exhausted all options that I can think of.
×
×
  • Create New...