chris mac37

Ok I’ll check that out. My Speedo works in the cluster so I would assume it is plugged in. Just no signal wire from the cluster to ecu

Thanks. My gauge cluster was swapped to the manual one So I’ll pull it out and run a wire from cluster to ecu. I’ll also try swapping pin 58 to 29 and see if it works as well

Hey so I did some poking around and pin 29 has no wire in it. From the ecu Pinout I got it looks like pin 58 is a signal wire. (Signal 1) or do I have to run a wire from my cluster to the ecu to pin 29? I wonder if this is part of the reason why most of us can’t get launch control to work on our cars lol the car was originally an rb25det neo automatic but was converted to manual tranny and original engine harness was still used just the tranny harness was changed in the conversion

Ok I’ll pull it apart to have a look. Thanks.

Map attached

ya it should be working out of the box lol heres my current saved file mar14 2021 update.pclr

hello.im trying to understand the closed loop in my map and how to set it up. i have my target air fuel table setup as boost reference as the car pretty much runs at high boost (25 psi) most of the time . i have my map almost complete. i still have the oem o2 sensor running and also have my wideband connected to the ecu as well. if someone could have a look at my map i would very grateful current 2020 july 4.pclr