Jump to content

Owen

Members
  • Posts

    6
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Owen's Achievements

  1. G’day, trying to incorporate a Yaris EPAS with my FuryX. I’ve copied Adam’s stream for the vehicle speed, but would like to confirm I’ve got the RPM stream right. Single frame of 8 bytes, none for ID position, set Ignition Idle Status as the parameter on start position 0, width 16, multiplier of 1024. With this, the sum of 708 + 8 + 1024 &FF will always be 0xCC (dec 204). So second parameter I’ve just chucked in the same ignition idle status, given it multiplier of 0 and offset of 204. Am I correct that this will give the desired result of turning the steering on when the motor is running?
  2. Kinda found a workaround for the rant at the end thanks to some smart cookies in the UK. There are a bunch of XML files hidden in the race studio back end that can be used as bases for new settings. Will play with that to get what I want. Now to set up a custom CAN stream I guess... Cheers, Owen
  3. G'day all, Playing around setting up my FuryX and MXG Strada dash, and trying to understand the full canbus stream. There seems to be plenty of items I won't be using, and plenty not there that I would like to use. Is there a way of adding additional items into the stream to be read from the dash? For example, I want to put the cruise control status and set speed on there, plus traction control status. The help file doesn't really go into detail with this (probably because it's a can-bus of worms). Is there a way to adjust the data stream? Or are there more values in the stream (can aux outputs...???) that can be configured in race studio (not found a lot in there). The other way I could do this would be to completely rebuild the stream on both ends as a custom stream. Not the quickest way to do it, but would certainly remove the clutter and add the bits I want. I do find the lack of ability to customise the display on the MXG a bit annoying (maybe quite a bit annoying). AIM tells me this is because they have to make sure all displays work and are legal, however I'm not sure how this applies with varying legality requirements in various countries/jurisdictions? It would be nice to rearrange so I can get rid of things like the current gear, and add things like cruise mode icon in a corner above the cruise set speed... but no method for user configuration of the pages (beyond changing the value in the set location) is available. Yes there's pages with HEAPS of info available, but this becomes a clutter for normal driving (this is a street car... hence the street version of the dash). I guess some ability to adjust this would be nice. Can it be done with some rudimentary editing software (even an xml editor if it's built that way) Cheers, Owen
  4. Owen

    Change ECU type

    Thanks Adam. I'll chuck in 10ms for the 1000cc injectors and go from there once running. Cheers, Owen
  5. Owen

    Change ECU type

    Thanks for that. Sounds like I'll not be able to set all of this up until I receive the ECU. I'll take an estimate on the master fuel number and correct it once I have the engine running. Cheers, Owen
  6. Owen

    Change ECU type

    G'day all, I'm prepping a basic tune for my FuryX for when I purchase next pay. Given this will be used on a VVTi 1JZ, the logical option is to start with the JZX100 plugin ECU base tune and translate it across to the FuryX. So I've opened the JZX tune, but am unable to select certain things (onboard Lambda, E-Throttle etc) because the plugin ECU is based on a lower spec board. Is there a way for me to change which ECU this tune thinks it is so it unlocks the features that I'll be using? The other method I can think of is to open the FuryX base map, then open the JZX plugin base map as a compare and manually set the Fury up the same. This would be rather tedious. Final thing, I've adjusted to full sequention ignition (easy), however can't find if there's a simple setting to blanket change the injector size? Do I just do a blanket percentage offset on the fuel table, or is there a setting for injector flow rate that should do that calc for me? Some other ECUs I've programmed this is the basic method. Thanks for any help, look forward to getting this thing set up. Cheers, Owen 1JZ Setup mapv2.pclx
×
×
  • Create New...