Jump to content

llabmik2

Members
  • Content Count

    16
  • Joined

  • Last visited

  • Days Won

    1

llabmik2 last won the day on December 13 2016

llabmik2 had the most liked content!

About llabmik2

  • Rank
    Member
  • Birthday 07/02/1985

Profile Information

  • Gender
    Male
  • Location
    Fruita, CO

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. llabmik2

    Ability to control two 3 or 4 ports

    Didn't think of that. That would work no problem though.
  2. Would it be possible to add the ability to control either two 3 port or two 4 port boost controllers with two separate WGDC maps for compound setups? That way you can run your high pressure turbo up to like 30psi, and run the low pressure turbo at like 20psi, without using a manual boost controller on either one of them.
  3. llabmik2

    643whp MINI Cooper S

    Thanks. Lots of time into the map. AFR is locked in pretty well, after lean spooling it, it flattens out and stays there. Timing is also very smooth. I like to tune cars that not only make power but run smooth also. Hmmm. Never thought about it. I know the spark cut on the current traction control works well and works fast, I was just thinking that for more of a corner carving car, that DBW mapping might work well.
  4. llabmik2

    643whp MINI Cooper S

    Thanks Scott!! Ill be getting more videos come spring of me putting the TC to work. As ill be turning it up to 43psi a little over 700whp.
  5. llabmik2

    643whp MINI Cooper S

    With the drag radials on the front and regular street tires on the back, the targeted slip is 12%. That includes the tire size difference. With 100% traction on low boost the slip is 6% between front and back. So Targeting 12% has seamed to give me the best grip using the acceleration reading. Anymore more and the traction control just wants to go into a cycle. Any less and It doesn't accelerate at hard. With the current PID settings, it targets it well and maintains it. I was having a big over shoot when I first started messing with it, It would only overshoot on the initial cut, and it would cut so hard it would then cycle a little then flatten out. Now I can pretty much hold 12-14% solid while spinning depending on road conditions and temperature. Only thing I wish could be changed currently would be two things. One for traction control. On DBW cars like mine, it would also be awesome to use one of the 3 DBW tables as an overlay with referencing slip to control it even better using spark, and throttle. Then on the Rolling Anti-lag (latch rpm) I wish it could be used in conjunction with launch control not one or the other. So I can have LC activating off the clutch switch, and then latch RPM acting off a switch, without having to hook up my laptop to change those settings.
  6. llabmik2

    643whp MINI Cooper S

    Hey guys. Posting up my 643whp Mini build. Not sure if you guys want a long post or just the jist of it. So Ill be short and sweet. It is currently the record holding MINI in the world for HP. Would have made more with traction. 2005 MINI Cooper S 1.,7L RMW stroker--Carrllio Rods//High Compression coated Arias pistons//RMW billet crank//RMW head//RMW cam//RMW intake Manifold JCFab turbo kit using EFR8374 Twin scroll housing dual wastegate and exhaust dump out the hood Insane Shaft 1000hp axles Quaife diff Fic 2150's with a Walbro 450 in tank at 18V and a external DW 350 at 18V Running E85-E100///Static pressure set at 50psi Tuned by me on a Vipec I series PnP (Link G4+ now) Car made 640whp at 31psi in 3rd gear at 4600ft of elevation uncorrected. Couldn't keep it from spinning on the dyno. No where on the front of the car to rachet down tight enough. Going to a hub dyno. Shooting for 710-730whp before upgrading to the EFR9174 and shooting for 850whp Couple videos Testing out the traction control and Rolling Anti-Lag with the Link https://www.youtube.com/watch?v=WBP1oXMV0N0 Quick second to third gear pull on MT 225/15 Drag radials
  7. llabmik2

    65530 RPM limit on Cal Tables.

    Well I missed that. Thanks guys. Just have to switch some things around.
  8. llabmik2

    65530 RPM limit on Cal Tables.

    Just wondering if it's a hardware limitation,software limitation or neither and it can be changed in further updates that is the limiting factor in the calibration tables in the analog input directory for readable RPM being limited at 65530. I am running a EFR 8374 on my MINI and want to use the speed sensor and log it with the Vipec. Problem is the translator box is 3K rpm at 0.5v and 190K rpm at 4.5v So its above the limit of what can be read. I would log it on a DI using turbo speed but its out of the hz range of the vipec.. Thanks Shanne
  9. llabmik2

    Traction Control Activation

    Thanks Dave. Didn't even think about looking under the DI settings. Thanks, Shanne
  10. llabmik2

    Traction Control Activation

    Is it possible to on the next software/firmware reversion to have a traction control activation? Is it possible to give us an: always on option, or activated off a DI, VAUX, AUX ect.?
  11. Would it be possible to add a activation timer on the DBW maps on a future update? Would allow for different DBW maps using the clutch switch for say a launch map. Wouldn't want the second or third map coming on during shifts when the clutch gets kicked.
  12. llabmik2

    throttle tp target error Mini cooper s

    Clear all the codes, then do a TPS cal and a throttle body cal under the throttle menu (Ethrottle setup mode). Then make sure you check to make sure the codes are clear again. Do a store, and then start the car. See if the codes are cleared. I have had one car where I had to do all this and leave it in setup mode for it to work right. As soon as I took it out of setup mode it would throw the code at me again and go into limp mode.
  13. Updated my MINI to the new firmware, as soon as I did that I can no longer log Can Freq/speed on any channel from 1-4. Speedometer works perfect, just gives me all zero's while logging, and in runtime values. Also the Wideband is dropping out. As soon as I go into runtime valves it starts to work again. Then it will randomly drop out again, followed by me going back to runtime to see that it starts working again...its populating values in the runtime.
  14. llabmik2

    Change Request: Master Fuel

    Eric, have you tried just putting a negative in front of the percent trim. I don't know if it would let you go past 4ms but you could try maybe -50% on the trim this would get you to 2ms. I don't have a need to run my injectors down to the 4ms mark at this time, I will when I go to 2K's so I haven't tried it but I have thought about it.
  15. llabmik2

    Issues on R53 with stock Tach

    No. its wrong no matter what. Its wrong even if the LC is off or hasn't been used since the car has been started. The main rev limiter is still kicking in at 8200, showing this on the laptop, but the gauge itself is showing a tad over 7K
×