Jump to content

Barra58

Members
  • Posts

    13
  • Joined

  • Last visited

About Barra58

  • Birthday 02/19/1958

Profile Information

  • Location
    Bowen, Qld

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Barra58's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Hi Dave, Yeah doing alright Mate, How's your good self, hopefully well on the mend. Talk soon laurie
  2. G'day all so yesterday, finally had success and turned out to be really simple, was on the Racepak forum and typed in the right search info for once, and turns out it has nothing to do with can bus as the interface lead is serial, stupid me, so anyway here is a link for anyone else trying to do this and also there is mention of a proper can bus interface but is only available as one off specials. http://www.racepak.com/forums/viewtopic ... 8+with+udx Cheers, laurie
  3. Thanks Simon, i'll give it a go when i get back home on Monday. Cheers, Laurie
  4. So here is my pcl! hopefully anyway XH GTX3582R 1000 cc injectors and new cam settings.pcl
  5. Hi All, I'm trying to get my racepak UDXSR dash and ViPec vnet module to read from my V88, have set up the dash ok and am trying to find out what the channel id is from Racepak, however my question hear is, how do I change the channel ID in the canbus configuration in VTS, I have the latest version and firmware has been upgraded ECU ser # is 12xxx, I have tried to change the id but it keps reverting back too ID 1000 or ID 0 I have hit apply each time I have tried to change and even tried a store but no success. Regards, laurie
  6. Barra58

    Can Bus

    Hi All, have been having a play with this Can Bus fly lead, no matter how i connect it, (open circuit, or with 120 ohm resistor on the end or with xr6 cluster on the end) i loose computer comm's, ie computer starts searching for the connection to the V88. Is this normal or am i doing something wrong
  7. Couple of pics of the project!
  8. The Barra lives, the V88 is awesome, Many thanks to Dave Kriedeman for his huge amount of help, He's awesome with these units, again many thanks Dave and ViPec.
  9. Barra58

    Can Bus

    Righto, thanks Simon, I'll get onto it. Cheers, laurie
  10. Barra58

    Can Bus

    G'day, chasing info on where i can source the plug or plug and harness for the can bus port on V88, Cheers, laurie
  11. Sounds awesome, I'll be hooking up the DBW as well, also the vct. You got a thread on it? if not keep us posted here. I read the 1 you did on the 5.4l ford, that was pretty much my decider for the V88, this is the 1st ecu transplant for me, previously just modified existing ecu's with J3 chips.
  12. G'day all, just got my V88 last Tuesday, many thanks to Mark from Godzilla Motorsport, AWESOME service. anyway its going to power a 4.0l dohc barra motor with a few goodies from Atomic, Camtech, Spool and later on Garret, which will be going into a 99 XH falcon ute.
×
×
  • Create New...