Ausz3
Members-
Posts
13 -
Joined
-
Last visited
Ausz3's Achievements
Newbie (1/14)
0
Reputation
-
Hey Lads i thought id just post a quick reply incase this ever happens to anyone else they can fix the problem i accidentally had rewired my 3 wire icv wrong just swapped my aux 1, and aux 2 wires around and its back to iddling smooth at 900rpm thanks for the help ... Regards James
-
Ok i will try it out tomorrow and let you know the results. Thanks Again....
-
https://www.dropbox.com/s/eq7osv7xa2rx7 ... 3.pcl?dl=0 there you go mate thanks again for ur help im not aware of any air leaks i did have a good look im starting to think i may have messed up with the wirring
-
hey mate thanks for the quick response I will have a look at the iddle settings and get back to you... You mentioned my car is idding at 980rpm .. ? on the vipec software its showing me 1600rpm i have not changed any firmware on the car i did however redo my wirring loom neaten things up... could it be that i have wired something wrong??
-
https://www.dropbox.com/s/ydlmerjbfdf2l ... m.llg?dl=0 sorry mate try this one
-
thanks mate have uploaded the log file below https://www.dropbox.com/s/zoq5feyvzqeq8 ... 7.png?dl=0
-
sorry guys it wont let me add the llg file
-
Hi Guys m52 turbo charged engine havent had it running for 10 months I started it today and its iddling high at around 1600 rpm and slowly creeps higher , if i press the accelerator momentarily it drops back to 1600rpm then creeps up again .. any ideas ? i know my wideband sensor is stuffed and sitting around 22 but even with it switched off still getting same results i have uploaded a log file below Regards James
-
could someone plz send me one aswell ruiz at live dot com dot au regards James
-
The support of this site really sucks
-
anyone got a base map i can use and tinker with ?
-
Gday just wondering if the m52 vanos solenoid has diodes on the connector that need o be removed??