jervies
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by jervies
-
-
-
-
-
Ive gone from single pump to double and dual fed rails bigger reg ect so dont think fuel pressure is an issue but ive just hooked up a sensor because i had one anyway and cant hurt to check
-
So ive leaked down no5 and 25% so not bad, cleaned injectors and tips were black on cyl 5 and 6, 5 being the worst.
Ran it on weekend and cyl 6 drops out during the burnout stays at 300, during the run 5 and 6 are down 100 deg as it gets in to revs, kept pulling fuel and made no difference really struggled to get mixtures in the 11s. Ill post the log later
-
High 900s.
It does it when i pull 10lb of boost out of it as well. lean while there is extra unburnt fuel going past the 02?
Idle is terrible with the moran injectors and hardly concerned about that atm
Coils are all individual from ecu, coil ground to front of head, ecu ground to back of head. i now have capacitors on the trigger wires incase it was noise. positive is a heavy gauge cable splitting off just infront of coils
missfire
in Vi-PEC i Series
Posted
Yeah my map is shit at the min, everytime i go out im changing things on the fly, and have been for 12 months with this issue. I checked lifter preload and there's heaps, im working on a fix to go solid, i might try fix preload in the meantime. Ive got decent breathing and no oil leaks, ive had the manifold and head off double checked everything and still same issue. My deadtimes are completly wrong so ive been working on fixing that aswell.
Its a series 2 v6 buick motor, gt35/40 turbo, 1600cc morans, e85, ls1 coils, c4 transmition powering a 1580kg vt commodore. Its being tuned on the track no dyno.
Im not 100% sure on the deposits, they seam to be oil. I think i really need to fix the preload issue and eliminate that first.
Thanks for the help