Jump to content

Bud

Members
  • Content Count

    65
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by Bud

  1. Bud

    Fury or thunder X

    Hello some news for ecu Fury X will be availanle? thanks
  2. Thanks Adam can you explain why you setup like this? i really interest to understand thanks in advance ludovic
  3. Thanks for your answer, i will test your setup before i test also this setting
  4. Hello, i have Subaru plug in G4X with Link CAN Lambda can you help me for setting correctly Lambda Closed loop. For correct setting of "Gain Control Table" and "Update Rate TAble" Thanks in advance for your help Ludovic
  5. Hello thanks for your feedback i cmodify setting it is working well thanks
  6. Hello today i try to connect & Configure LINK CAN Lambda to Plug iN G4X Subaru i follow instruction on help for setup can but some problem when i connect CAN LAmbda , i am on step for CAN Devices for find Lambda CAN i join pictures also i have error message " CAN is not supported by firmware version ..." i already use last version
  7. Hello I start to confguration costumer car with Plug In Subaru WRX9 G4X i have Error fault number 9, what is it? Also I have some error and some problem for calibration for MAP Sensor Omni power 4b i try to cal 1 or linear cal 1 with 0-5v & 0 - 400kpa when i try to calibration some error show me Some idea of problem? i join base map if you need regards Subaru WRX V9 G4X Xtreme Plugin base map 01.pclx
  8. Hello I will search Anti-Lag solenoid valve for the ECU controlled air Bleed Do you have some advice & feedback which materials is good to use and where i can buy? Thanks in adavnce Bud
  9. Bud

    Link CAN Lambda Problem

    Hi Adam, I changed Lambda sensor and problem is fixed. thanks for help regards ludovic
  10. Bud

    Link CAN Lambda Problem

    ok thanks i will try new sensor and keep you update
  11. Bud

    Link CAN Lambda Problem

    ok thanks i will try new sensor lambda lsu 4.9< how to do calibration sensor?
  12. Bud

    Link CAN Lambda Problem

    Hi Adam thanks for your answer i join copy of your request
  13. Hello Since one week i have some trouble with my LINK CAN Lambda. it is very strange, during idle and running CAN running correctly and sometimes CAN Lambda STOP to work and value is blocked to 10.1 very strange , I check all connection and sensor. i not understand, can you help me? if i change Lambda sensor , i need to calibrate system? how to calibrate? thanks in advance regards
  14. Bud

    AVCS

    Hi Adam, Do you think same for MIVEC to keep axis TP? Best regards
  15. Hi In case i have one base map from Lancia delta Hf integrale 8v from link G4 or vipec ecu
  16. Bud

    Setting Cranking ID 1700cc

    Thanks Adam for your advice correct for moment i am with petrol fuel regards
  17. Bud

    Setting Cranking ID 1700cc

    Yes I mean Pre-crank enrichment & Crank Enrichment setting
  18. He;;o i order new Injector id 1700cc for my mitsubishi lancer evo 9 i use link G4+ plug In can you advice me some basic setting of cranking with id 1700 cc thanks in advance
  19. Bud

    Fury or thunder X

    ok thanks for information i will wait fury X for order keep me in touch when is ready to order
  20. Bud

    Fury or thunder X

    Hi Do you have some news when FURY X or thunder X will be available. I wait for order regards
  21. i think it is same of 1300cc. i think yes i have diffuer
  22. hello i used the dead time ASNU 1500cc give me
  23. Hello I have some problem for setting correctly new injectors ASNU 1500 cc. I explain you, i have Mitsubishi Lancer evolution 9 with tune engine with ECU LINK G4+ plug in. Before my car was running with injectors ID1300X with fuel Pressure 3.5b, on modelled multi fuel. with fuel e85 i was limit on boost fuel map was alredy number 150 on fuel map. I order new injectors to my firend. He order ASNU Injectors 1500cc. https://www.asnu.com/injectordata i start to install and made setting of new Injectors. i start from Fuel pressure 3.0b for 1500cc setting Now
×
×
  • Create New...