Jump to content

Bud

Members
  • Posts

    71
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Bud

  1. Thanks Adam, I will test tomorrow do you have advice which level i need to test? regards
  2. Dear all, I have one link G4X plug in on my Subaru GT 1999-2000 GC8 I try to set up correctly gear ratio for use on boost control strategy i not arrive to made correctly the calibration of Gear Ratio and my speed signal is really noisie. Can you help me? I share with one log and print screen of speed set up. Regards PC Datalog - 2023-10-3 7;17;24 pm.llgx
  3. i have just base map no log but i can do some log Subaru WRX V9 G4X Xtreme Plugin FlexFuel 4b 1700cc 01.pclx
  4. https://drive.google.com/file/d/1afBhv9IeL58yDtu3LxU1gat54D9UIne5/view?usp=sharing
  5. Hi All, I have problem on my Link ECu Plug IN G4x Subaru WRX9 i try to setup 3 boost map by switch. i join pictures from setup i think setting is correct but when i activate switch, on software activate wastegate table 2 or 3 correectly> but in reality when you test on driving all stay to 0. Also strange the green cursor no jump on different table. i try to join movie 2nd problem, on this car we connect Link Dash strada MXS 1.2 i have no speed signal on dashboard by the CAN. Speed working on link software but nothing on dashboard i test all signal (speed 1, speed2 etc>>) it is same> thanks in advance https://drive.google.com/file/d/1afBhv9IeL58yDtu3LxU1gat54D9UIne5/view?usp=sharing
  6. Bud

    Fury or thunder X

    Hello some news for ecu Fury X will be availanle? thanks
  7. Thanks Adam can you explain why you setup like this? i really interest to understand thanks in advance ludovic
  8. Thanks for your answer, i will test your setup before i test also this setting
  9. Hello, i have Subaru plug in G4X with Link CAN Lambda can you help me for setting correctly Lambda Closed loop. For correct setting of "Gain Control Table" and "Update Rate TAble" Thanks in advance for your help Ludovic
  10. Hello thanks for your feedback i cmodify setting it is working well thanks
  11. Hello today i try to connect & Configure LINK CAN Lambda to Plug iN G4X Subaru i follow instruction on help for setup can but some problem when i connect CAN LAmbda , i am on step for CAN Devices for find Lambda CAN i join pictures also i have error message " CAN is not supported by firmware version ..." i already use last version
  12. Hello I start to confguration costumer car with Plug In Subaru WRX9 G4X i have Error fault number 9, what is it? Also I have some error and some problem for calibration for MAP Sensor Omni power 4b i try to cal 1 or linear cal 1 with 0-5v & 0 - 400kpa when i try to calibration some error show me Some idea of problem? i join base map if you need regards Subaru WRX V9 G4X Xtreme Plugin base map 01.pclx
  13. Hello I will search Anti-Lag solenoid valve for the ECU controlled air Bleed Do you have some advice & feedback which materials is good to use and where i can buy? Thanks in adavnce Bud
  14. Bud

    Link CAN Lambda Problem

    Hi Adam, I changed Lambda sensor and problem is fixed. thanks for help regards ludovic
  15. Bud

    Link CAN Lambda Problem

    ok thanks i will try new sensor and keep you update
  16. Bud

    Link CAN Lambda Problem

    ok thanks i will try new sensor lambda lsu 4.9< how to do calibration sensor?
  17. Bud

    Link CAN Lambda Problem

    Hi Adam thanks for your answer i join copy of your request
  18. Hello Since one week i have some trouble with my LINK CAN Lambda. it is very strange, during idle and running CAN running correctly and sometimes CAN Lambda STOP to work and value is blocked to 10.1 very strange , I check all connection and sensor. i not understand, can you help me? if i change Lambda sensor , i need to calibrate system? how to calibrate? thanks in advance regards
  19. Bud

    AVCS

    Hi Adam, Do you think same for MIVEC to keep axis TP? Best regards
  20. Hi In case i have one base map from Lancia delta Hf integrale 8v from link G4 or vipec ecu
  21. Bud

    Setting Cranking ID 1700cc

    Thanks Adam for your advice correct for moment i am with petrol fuel regards
  22. Bud

    Setting Cranking ID 1700cc

    Yes I mean Pre-crank enrichment & Crank Enrichment setting
  23. He;;o i order new Injector id 1700cc for my mitsubishi lancer evo 9 i use link G4+ plug In can you advice me some basic setting of cranking with id 1700 cc thanks in advance
×
×
  • Create New...