Honestly, that I think is the problem, ViPec ECU sees higher temperature reading than actually is.
I can compare to the ECU reading to the my temp gauge, but without riding I can't get to 190 and temp flashing.
Plus need the help with AFR gauge hook up for the logging. I use Innovate MTX L, but analog output from them is set for AFR. In the ViPec manual look like the calibration could be done in the AFR, but in the drop menu for calibration AFR is not as option, just Lambda .
THX milos
This is what manual say :
Example
The air fuel ratio corresponding to 0V is 9.0:1 while the air fuel ratio corresponding to 5V is 19.0:1. This information should be entered in the following way.
· Output Units - Set to AFR as we want to display Air Fuel Ratio
· Input Value A - 0.00 V This is the sensor voltage at the first point.
· Output Value A - 9.00 AFR This is the AFR at 0.00 V
· Input Value B - 5.00 V This is the sensor voltage at the second point.
· Output Value B - 19.00 AFR This is the AFR at 5.00 V