1320MINI
-
Posts
35 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by 1320MINI
-
-
G4+ to G4X
in G4x
Thank you for the above,
I'll get a copy of the CAN stuff.
-
G4+ to G4X
in G4x
Hi Guys,
Couple of issues, I've converted to a G4x, I used the CAN stream from the link below. The Standard dash channels all work but the 2 extra Digital channel's don't display on the Dash.
http://forums.linkecu.com/topic/7039-digital-input-state-via-can/
Also i was trying to set up a virtual Aux channel but only have the following options,(OFF , Test ON , ON/OFF) The G4+ use to give a list of different options.I was looking to use it as a GP output.
-
Thank you for the help with this Adam,
-
-
Hi Adam,
Thank you for helping with this, I have the traction control working but don't have the Launch control coming through.
-
Yes mate. As well as the DI 5 which i have set as Launch control
-
Just to update,
The traction is still active, but when you disable it there is no indication. This is something i would really like to send to the dash. Weather it light a LED and or Display a message.
-
When you fire the car up the traction control is always on ( if set up in the ECU) Most MINI's have a DSC/ASC button to turn it off. When you remove the rev counter that shows the light that its disabled, its permanently disables the Traction control.
So i was wondering if it can still be used on the OEM button and a message through the AIM Dash.
-
Adam,
I'm starting with a fresh file in the ecu, I've set up the basic dash settings and Launch Control.
Would it be possible to send a message to the dash regarding:
Launch control active
Traction Control deactivate.
When we run a dash in the MINI the Traction is always deactivated as the system runs through the original Tach which is normally removed.
Many Thanks
BMW Mini R53 G4+ Xtreme Plugin dash CAN.pclr MXS 1.2 Strada LINK.zconfig
-
Hi Guy's
I'm very new to the CAN system, I run a MINI LINK in my BMW MINI and i'm going to for the LINK AIM Dash. When we have fitted these dash's in the past the Traction Control is always disabled as it runs through the OEM Rev Counter which we replace.
Is there any way to show on the dash:
When launch control is activated ( currently on DI5) Through an LED and Message
Send the Traction Control message to the dash.
Can this be done? Many thanks for any help.
-
Adam,
It worked for me also,
-
If you have non driven wheel speed you could work out how fast 1st gear will take you then set up a virtual AUX to turn on up to a certain MPH while TP is over certain amount.
-
Guys,
Whats the easiest way to get a speed sensor reading to a MINI LINK plugin.
The speed sensor is the Borg Waner unit. I have read people were using a external piece to convert the Hz rate.
-
I had a similar issue a while back and i think the USB drivers on the latest PC were not right. I loaded a older version and connected straight away.
-
-
-
-
Are you looking to run a delay or to step up the fuel with a dry kit.
The dry kits change so much with bottle pressure so a input from the bottle to the AN input could be used as an axis to make sure its always perfect.
You can use the conditions to activate if your using as a anti lag.
-
On 12/9/2018 at 9:51 PM, mapper said:
You can already do that. Just setup a anloge input for rotary switch. Use eighter direct voltage or use a calibration table to output position.
Use rotary voltage or position as an axis for launch rpm, traction aim, boost aim, etc.
Really like that idea, which rotary switch's are people using?
-
It's very strange, i work with a load of these and this is the only one that show's this message.
I've tried all the basics, re installing firmware, older and current. I don't get a chance to delete or see a log.
-
ECU firmware is 5.6.5.3389
PC Link version is 5.6.5.3338
-
+7
-
-
I would use Link CAN Lambda or AEM.
R53 mini aem wideband
in G4x
Posted
I use AN7 or AN8,
Plug into the original O2 plugon the car.