neil brown

Has the unlock code been applied If brand new first power up to program it require unlock code supplied by dealer who supplied it

Your location might help you

I couldn't be any further away as I stay nr Glasgow in Scotland

I have one

Fresh tune as software is different between g4+ and g4x Sure you can copy tables over but the admin gods should be along soon

But new https://www.torqen.uk/brands/link-ecu/accessories/looms-and-cables/g1-g4/52777-link-ecu-serial-link-ser.html

https://www.torqen.uk/brands/link-ecu/accessories/looms-and-cables/g1-g4/52777-link-ecu-serial-link-ser.html 100 pounds new

they are not obdII due to their age, as these were out well before obdII was thought off you can see all info on the hand controller if you have one

Friend had dccd pro in his car due to above issue which was tapped into front left abs sensor Speedo would read 20 mph sitting still and bounce about all over the place when driving and also brought on abs fault light which would not clear Chances of it working is slim I'd say as he decided to sell the car in parts to recoup his money

Can't tap into abs as will thro abs code on that wheel Later 6 speed boxes from wrx hatches and legacy don't have a speed signal from box but is done over can from the modules on board See picture with circle is where's the speed sensor is fitted if got a blank then there is no drive fitted for the speedo sensor

Is the plug touching metal as that's the return path otherwise won't spark Do the coil packs require an ignitor separately or have they an ignitor built into to them. Did you set up the dwell times in the ecu . Dwell times 8V 5.34 10V 4.69 12V 3.93 14V 3.40 16V 3.40

put the old pump back in if runs fine with that, check out the new pump and could be a faulty batch

Best try putting this in g4 section

Sg9 sti has DBW and AVCS as well Moonson not suitable as above have stated

It will be a jgn sg9 sti forester with drive by wire throttle from 2004 to 2007 model

Cable and Tuning pc box required That depends if ecu is either pc tunable or hand controller only Put picture of main board sure Simon or other can advise

will need an external e-throttle module for it to work

Have you done a compression test on the engine as low compression will give you a misfire And what engine are you running as well

Silly question Fuel gauge shown empty on dash Is there enough fuel in the tank to create fuel pressure

Maybe dwell times are wrong to suit the coil packs

Don't if allowed here But there was a silver and blue g4 storm ecu, so picture and price would help you massively if wanting to sell a d your location might help

Still got it Thanks adam for the tag

What you trying to do with can

At the moment I have a silver storm g4 installed for last 6 yrs on a home made patch loom

Can drop in my g4 file just now to g4+ and auto converts