Jump to content

Roger Junge

Members
  • Posts

    6
  • Joined

  • Last visited

Roger Junge's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Previously Roger Junge wrote: I want to use one of my Digital input switches to start recording data logging. I had it working at one time but cant remember or find any help to perform this. Can you please help? I am using DI9-GP Input on low side active. The idea is that when I activate the toggle switch it would record until I deactivate so I can review/download the log file after my run that I am interested in. I have the G4 Xtreme ECU
  2. I want to use one of my Digital input switches to start recording data logging. I had it working at one time but cant remember or find any help to perform this. Can you please help? I am using DI9-GP Input on low side active. The idea is that when I activate the toggle switch it would record until I deactivate so I can review/download the log file after my run that I am interested in.
  3. At one time I was able to PC log by using a DI input switch that is wired to my dash. It does not work now. Was that function removed and if so why? I checked the DI connection and it is good.
  4. I had Aux 8 & 9 defined but when I uploaded into my ECU the ouputs went away and now I can’t redefine them. Why is that? See attached Roger
  5. Good answer Thanks Jurgen
  6. I have an 04 Honda 3.5L VTEC J35A4 engine for which I installed a G4 Extreme ECU. I am uncertain about what the settings are for VVT (page 31 & 32 in G4 Install manual). I have the Crank Angle Sensor (CAS) connected to Trigger 1, Cam Angle Sensor (CASI) connected to Trigger 2, and Cam Angle Sensor II (CASII) connected to Digital Input 3. I have the Variable Valve Timing (VVT) Solenoid connected to Auxiliary Output 3 as described in the G4 Install manual. Question1: What do I set the Configuration, Cam Type to in Aux 3 - VVT Cam Solenoid? Options are: Inlet /LH, Inlet RH, Exhaust /LH, Exhaust RH Question2: What do I set the Configuration, Cam Type to in DI 3 - VVT Cam Position? Options are: Inlet /LH, Inlet RH, Exhaust /LH, Exhaust RH Thanks Avocadoman
×
×
  • Create New...