Jump to content

Kenian Fatherley

Members
  • Posts

    3
  • Joined

  • Last visited

    Never

Kenian Fatherley's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Hey guys , I have recently upgraded my g3 LEM to g4 firmware . ( running adaptalink ) .. Its a s14 sr20det I want to set up some warning lights for coolant temp and overboost ( ECT & MAP ) .. Obviously gonna have to wire them in as a auxilary output and set up as GP outputs .. How do i do this when i am running a standard s14 loom and adaptalink ? Where do i wire to etc etc ?? any help much appreciated . Cheers Kenian .
  2. Dont worry guys , jurgen has already cleared this up for me .. cheers
  3. Hey guys , Im running a g3 LEM with a adaptalink on a s14 sr20det . My question is this : - With the adaptalink DI 1 / aux 4 can be setup to run either the aircon request signal or Vehicle speed sensor with the selection of jumper 1 on the adaptalink box .. I want to setup a switch to run either 12v or a earth to DI 1 for antilag selection .. How can i do this ? The car has no aircon and due to modified steering knuckles had ne wheel speed sensors hooked up either .. Can i splice the switched and relayed 12v or earth feed to say the vehicle speed sensor wire on the stardard ecu plug and select J1 to vehice speed sensor setting and then select DI 1 on PClink as antilag activation ??? Or is there another way to setup DI 1 with a switch to select the anti lag mode ? Any help much appreiciated ! Kenian .
×
×
  • Create New...