Jump to content


  • Content Count

  • Joined

  • Last visited


Everything posted by Jono1436215426

  1. Plugin.. DI 1 is wired to Ignition switch.
  2. Hi Dave. Dave to the rescue as always . So the IAT sensor, I have no idea what type it is but how ever I've taking a quick photo of it and have attached it to this message. You'll probably know what type it is. Last, the car does shut down on me but in a mysteries weird kind of way. Like for instants, ill be driving around for a whole day on a long trip no problems. The next day up the road and back no problems. The same day start it up, go to the top of my driveway and the car stops? I don't get it. Wouldn't start up just keeps winding, so left it for about 5mins, started it and away she goes. Hooked it up to the PC and didn't find any errors but the ''ECU Hold Active: The Engine has been shut down'' one that I have always had??? Any ideas??? Someone told me it could be a ignition problem but I've replaced the ignition switch with a new one so I'm stumped if I know what's wrong here. Thanks, Jono.
  3. HI, As the title, ive seen the ignition test option under the drop menu, but how do I test it? and what am I looking for? or how do I view the test? thanks. regards, Jono.
  4. Hi. I've been getting this error and was wondering if anyone knows something or a fix for this? Error: ECU Hold Active: The Engine has been shut down Assigned to: Injector Dive 8 Car: 1996Â Mitsubishi Lancer GSR Much appreciated. Regards, Jono.
  5. Hi all, As you've probably seen already, I've flooded the forums with my car problems. But I've been saved, BIG shout out and thank you to the man @DavidKriedeman for helping me to get my car going again. I highly recommend, if any problems, Daves the answer. Haha. No but honestly this guys a guru, drop him a line or two. Thank You. Kind regards, Jono.Â
  6. ID for team viewer, hope this is right never used this before 909 424 156 thanks.Â
  7. Hi dave. Ok. I'll download it now. Thanks.Â
  8. Hi dave. Thanks. As for the file above I still can't get the car to start? I've fixed all the errors and sensor are working right now (they were signed to the wrong Chanel) but no go? What else could I be missing?? I've gon through the whole manual to set it up like new again but just keeps winding no fire. Regards, jono.Â
  9. Hi dave. Thanks for that. Regards, Jono.Â
  10. Ive switched it to low and the engine fan just gets louder and quicker??
  11. Hi dave. I've done everything You said. All sensor are working. But now the car won't start? The trig1 arming status keeps going up and down where trig2 arming doesn't ? thanks. Jono
  12. hi. Does anyone know what this is? It's wired to pin 1, 2, 14 & 15 (injectors) could be the causs of trying to get my car started? thanks. Jono
  13. Hi, Quick question..O2 signal at ground (Input at 0V/Gnd) has anyone had this problem with G4 link? Cheers, Jono.
  14. Hey, Does anyone know who GEAR TECH sends there tuning off to? They located down in palmy New Zealand. Thanks. Kind regards, Jono. Â
  15. Sorry reading the other post, it is the radiator fan because there is no AC. THANKS.Â
  16. Ok (:  I'll only post on this thread. No none of any are tuned. This is what I have done so far. I updated the firmware and loaded the evo 4-8 base file straight out of the folder and it gave me 3 errors. 1) the map sensor 2) the IAT sensor and last 3) an Volt 4 low value error. And plus the fan stays on But I believe that I was told to try and set the polarity to HIGH instead of LOW.  So I will try this tomorrow after work. Sorry for the confusion. Thanks dave. Jono.Â
  17. Hey does anyone know of any of these errors?
  18. How can I do that? Thanks.Â
  19. Hi. So I have lost my original base map file and building another one from scratch. I have loaded the EVO4-8 MAP to my ECU and it came up with a few errors. ive got no idea what these errors are but the car was running fine untill I lost the original MAP Here is the PCL file, if anyone could help me set it up so I can get the car going again would be much appreciated. Thanks. Jono.
  20. heres what happened when it did start but idle was rough than died..
  21. Hi. My engine fan is constantly running even when the ignition is on when the motors not running??? Cheers.
  • Create New...