Jump to content

Garris Olive

Members
  • Posts

    2
  • Joined

  • Last visited

    Never

Garris Olive's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Thanks, yeah I decided to just run the Bosch sensor as Miles at Fine Line Imports (my Link dealer) suggested. He also suggested 17.4 ft. lbs. of torque for the Bosch sensor and also said orientation doesn't matter. I was encouraged to stick with the newest firmware, because Link would like everyone using it. That way if you have a problem and need to send in a Log and copy of your map, it will be on the current firmware. I do like a few of the other changes like the snake trail and being able to see the cross hairs moving through the various tables while reviewing a log. Is there any way to add or remove columns and rows, or do any changes have to be made in the Axis Setup? I just wanted to make sure I'm not missing something. Thanks!
  2. I'm running a G4 plug in and I'm wiring up the Knock block. I noticed the harness does not plug into the stock knock sensor. The stock sensor also has one white wire coming out of it, and the Knock Block harness has two... a white and black. What do people usually do when using the the stock sensor? I was also thinking of just using the Bosch sensor that comes in the kit so it would just plug in, but don't know what torque value to tighten the bolt to. Also does the orientation/angle in relation to the block matter like it does on the stock sensor? Last question is now that I'm using the latest 4.8 firmware, I noticed I can't right click on a table and add or delete a column or row like you could on the 4.7? I tried to do it in the axis setup, but that proved to be much more difficult, because you have to change all the other columns. It's also difficult, because if it is the same value as the one next to it, or not in between, it won't let you. So you have to start from the far right, changing the columns working you way back to the one column you wanted to change/add. What am I missing here? Seemed a whole lot better on the old firmware. Thanks!
×
×
  • Create New...