Jump to content

michael parkes

Members
  • Posts

    5
  • Joined

  • Last visited

    Never

michael parkes's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Ok that's no problem where would be the best place to send it to and whats there adress?I'm in Blenheim newzealand Thanks michael
  2. hay i tried buying a proper link (bosch) knock sensor and put that on and it did the same thing and i also tried connecting the unit directly to a battery and it did the same thing. any ideas on testing the unit to see if its faulty or anything else i could try to get it to work correctly? thanks michael
  3. ok thanks for the help i might try and get a 2 wire bosch sensor and see if it works with that cheers
  4. hay it does it with the engine not running and ignition on and it does the same thing with it running also
  5. hay i recently brought a knock link knock light and iv wired it up to a toyota 3sgte knock sensor, iv used shielded wiring most of the way like the factory wiring and kept the wire away from coils ect. and iv ran the signal ground wire to earth as the 3sgte sensor is only a one wire one. when i switch the ignition on the light flashes blue a couple of times then goes green for a few seconds then goes out for a few secconds then flashes red very fast and keeps doing this cycle. what do i need to do to make it work properly? thanks very much michael
×
×
  • Create New...