Paora Smith
Members-
Posts
7 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by Paora Smith
-
This is the converted tune
-
Hi guys, I have a g3 that I updated to g4 software. Link copied the tune for me. Car starts and runs but as soon as I bring the engine up to 1500rpm the ecu disconnects and the fuel pump keeps running. Any idea why this might be? Tune was running fine but I upgraded to g4 for vvti control. Tried new earth cables, plugs, unplugged alternator in case it was faulty. Checked all wiring connections etc. No faults come up when it happens. I can attach the tune once I am home tonight. The engine is exactly the same as previous. I am upgrading the cams and coils this week. Also I cannot roll back to g3 software for some reason had Simon talk me through it but would not work so that option won't work unfortunately.
-
According to this it is not so http://www.linkecu.com/support/documentation/technical-drawings/I16
-
Hi guys  Im just about to upgrade my stock 2jzgte vvti coils to ls2 coils. The setup I have now the ecu sends a negative signal to the igniter. But with the ls2 coils they need a variable 5v+ signal to fire(So I have read). Has anyone run these coils before? Is there any truth to this or do they run a negative signal also? If they do run a positive signal how do I get around this? Thanks
-
How do I set the baud rate?? I and using a usb connection cannot find any information on it
-
Hi Guys I purchased a g4 up grade from link a while ago installed it as I intended on getting a retune but I am running out of time. Is it possible to downgrade/reinstall the previous software so I can run the previous tune until I have upgraded the cams etc?
-
Hi guys I have a G4 in a car that I didnt tune it was tuned and running before I got it. On plugging the usb in my laptop and switching the link on before connecting I have 3 errors that keep coming up. MemLoc=280, MemLoc=281 and MemLoc=10386. I Cycles through these errors not allowing me to connect. What do I need to do to stop these errors or what is causing them? The engine runs and drives and I want to run the pc link to assign a tacho drive to a output. Any help would be great thanks!