Jump to content

William Grant

Members
  • Content Count

    2
  • Joined

  • Last visited

    Never
  1. Thank you for the quick response, If you could also shed some light onto the Distributor/ Cam angle sensor wiring would be greatly appreciated. I believe it is a "Optical /hall sensor" type distributor, so i have to use the +12V optical/hall sensor power supply wire along with Trig 2. Basically I need to know the pin out of the distributor wires so I know which wire goes where. Cheers, William.
  2. I have a bigport 4age from a AE86 levin, and I am using a link V5e. I've had a browse through a lot of forums and havent quite found what I need just yet. I am having a bit of trouble wiring in both the TPS and igniter. Firstly the link manual says for the TPS i must use 3 wires, My factory TPS has 4 pins and I dont know which ones to use, I know one is ground but struggling to find out what the other 3 are for. Also the igniter has 5 wires in and Im stumped on what to do here, I plan on using a distributor setup using only IG1 on the LEM. So any info on this is greatly appreciated. Cheers, William
×
×
  • Create New...