Jump to content

Wayne Greham

Members
  • Posts

    4
  • Joined

  • Last visited

    Never

Wayne Greham's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. G'day, what is the net effect of simultaneously having values in the large zones as well as the small zones for a link AFM ? Does one take precedence over the other ? is it a sum/combined effect ? ie If small zone 205 had +10% and large zone 0 had + 15% what would be the overall effect on zone 205?
  2. My manual for the link AFM describes a span range of 1 to 25.5. The hand controller I have does not display a decimal point for the span parameter (and neither does the log). I am assuming that where my span is currently set to 120, that equates to 12.0 as described in the manual, is that correct ?
  3. G'day Can someone please confirm that the "Oxy" parameter which is logged by serial link from a link AFM is actually the volts measured*100 i.e. where the log reads 96 does that equate to 0.96V as output from the O2 sensor. Secondly, if the VECU span equates to a range of 1V to 4.5V does that mean that a log value of VECU=255 equates to 4.5v and a log value of VECU=0 equates to 1V ? or is it the case that VECU of 0 equates to 0V and vecu of 255 equates to something else ?
×
×
  • Create New...