Jump to content

simon cox

Members
  • Posts

    2
  • Joined

  • Last visited

    Never

simon cox's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Hi Jurgen, I have tried to wire in the triggers as you stated, but i am still not getting any trigger reference. The triggers are optical, and rising edge. The mitsubishi ecm gives a 5v reference to these triggers, but the link dose not do this (from the trigger connection out of the link) so will this set up still work or am i missing somthing in the set up? I am trying to comfirm if the triggers i have are in good working order, but they were brand new ones so they should be ok. I dont know if the guy working on this originally has set up somthing in the base map to stop this working if that is possible? Your advise would be very greatful Thanks Simon.
  2. Hi I have taken over this from someone else and need some help; Ford winsor V8 (distributor/ single coil) fitted to an ED falcon, It has been fitted with TS magna pick-ups in the ford distributor from 4 cylender. The pick ups have a 12 vot feed and an earth, and the trigger's 1 and 2 are wired to cam nad crank respectivly. The G3 is linked to a laptop,and when cranking i cannot see any rpm or trigger activity (triggers working or errors) In the installation manual it states that the trigger terminals on the wiring loom has shieled double wires to the trigger pins, but i don't seam to have these? Please could you confire how to wire the triggers up and help with the no trigger pick ups Thanks Simon
×
×
  • Create New...