Jump to content

amvegeta

Members
  • Posts

    31
  • Joined

  • Last visited

Everything posted by amvegeta

  1. Hi, I would like to know why on the base maps, the subaru have different injector timing values? V1-V2: 360 BTDC V3-V4: 400 BTDC V5-V6: 360 BTDC V7: 400 BTDC V8: 400 BTDC V9: 400 BTDC V10: 470 BTDC What would you recommend for a V5-V6 with aac cosworth in 278 ° ex 274 °?
  2. ok, what do you recommend to me then? I think I saw a sensor on the link site that did both!
  3. Hi, I want to plug this 2 sensors on my link g4, how can i do? https://prosportgauges.com/products/premium-oil-fuel-pressure-sender https://prosportgauges.co.nz/products/prosport-oil-and-water-temp-sensor-scarles regards!!
  4. Hi, I would like to know if there are optimum settings, in order to have a good reactivity. Indeed for the low speed and mid speed it goes more or less, but for the high speed the cursor goes much too fast ... Can i have settings for low, mid et high speed? regards. i use quick tune on road because i didn't have dyno.
  5. Can i do the same thing with a link G4? regards!!!
  6. Because I have an innovative and I saw that you have advised in another post, the X-Series Wideband UEGO AFR Gauge Sensor Controller (PN 30-0300)! Is the model cited compatible?
  7. amvegeta

    Can Lambda G4

    Hi, Can we use a can lambda on a G4 plug in?
  8. Can you help me, for wiring and changes in pc link?
  9. Hello, I have a Subaru Gc8 V6, and I would like to put a bigger body throttle. Unfortunately I only find throttle body for V7 sti, with a link G4 is there a way to put the throttle body full of the V7 (throttle position sensor V7 on V6)? Regards. And idle sensor?
  10. Hi Dave, Apologies, as I looked at the picture on my mobile phone, so I did not see that there was anything I needed. thank you very much, when I rode I tell you, but I think it will go. Regards
  11. Yes this is what i want. But i don't know how to do it? What output to use? Could you give me a documentation, like a how to do it, because i never do that? I'am not a pro. Lol. Regards.
  12. Hi, Thank you. But I wanted to put a configuration switch to change the fuel map 95 has the fuel map of competition. Regards.
  13. Hi, Nothing new about the problem with the pictures?
  14. There is a problem with the gif. And can you explain me, how to put a switch on off to select the maps please. Regards.
  15. Two maps for high/low octane fuel. Regards.
  16. hi, can you give me the procedure to be followed to put a swtich (on off) for two different maps. if you have pictures or manuals, i take too!!! Amvegeta
  17. amvegeta

    Map sensor

    I wanted to take a 3bar or 4bar sensor map, what you advise me?
  18. amvegeta

    Map sensor

    Hello, I would have if there are sensor map you advise more than others, for use with a Link ECU G4? I had a map of 7bar sensor ecu link, but this one is hs, so I have to change !!! so I put the original (1999 subaru wrx europe GC8), what is the limit of this one? Regards. vgta
  19. But i have a G4!!!! It's not possible with the G4?
  20. Hello, I wonder if it's possible to have a rolling launch control with antilag? Which would be initiated by a button, like the Nissan R35 GTR Alpha 20 AMS. Thank you for your response.
  21. Is it possible to have the antilag with my launch control to increase the turbo pressure during the launch control?
  22. Hi i want to know if it's possible with a LiNK G4 for subaru impreza sti V5/V6, to have 2 maps can be switched on the fly with button in car. And how to do it? Regards.
×
×
  • Create New...