Jump to content

Andreas

Members
  • Posts

    3
  • Joined

  • Last visited

Andreas's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Hi! Thank you, i try to do it. The id is 1000 but I do not know what the speed is, or is it some way to find out what speed IQ3 Dash must have. I try with different speeds and removed the USB connectionfrom from the ECU too.
  2. Hi! Thank you very much for your answer. I get the information from racepak sensors in the screen but not ECU sensor I am novice at the ECU, I have set the Can settings, as the information I got with the cable: Generic Dash, CAN 1 I always get the same error when I use the cable SN 501520 Link G4 CAN interface cable. (COD error Type = 183 ID = 501520, Send Error. Template ID number expected.) It finds the cable but it always gets error code on it, it's a new cable. When I not use it, it works to read VNET without error code. But I want to see the RPM, oil pressure, boost pressure, water temp from ECU. I have updated dash's firmware and I can have both racepak and ECU cable in. I do not lose contact with ecu. I've tried to turn on and off the power on and take out the cable, but no contact with the ECU. Is it the wrong cable, or is there any settings in the ECU, I have not done right. Can I connect I88 directly to racepak IQ3 dash without linking it over racepak v-net? If possible, what cables do I need and how do i connect it? I have been in contact with the Swedish dealer, but they have no ideas what it could be.
  3. Hi! I have a problem connecting my Vi-pec I88 with Racepak IQ 3 Dash. When I read the v-net on racepak, it can´t find the information from the Vi-pec I88. I get the error COD Type = 183 ID = 501520, Send Error. Template ID number expected. I use racepak VNET cable SN 501520 Link G4 CAN-interface cable. Now I have no iformation from VI-pec I88, I can´t set racepak IQ3 dash like, Oil temp / Rpm I am a novice at this, and wonder what I should do for Vi-pec I88 to be found by racepak V-net. I just switched from carburetors to Vi-pec I88 on my dragracing car. I am very grateful for any information that may help me.
×
×
  • Create New...