Jump to content

chris12at

Members
  • Posts

    5
  • Joined

  • Last visited

Everything posted by chris12at

  1. Hi Adam, Thanks I will parallel the wiring for the secondaries I will look to get a cranking log when I am next able to get to the car. I do have synchronisation with good spark triggering and fuel pump activation. The fuel system is pressurised but so far the plugs are dry. I had the feeling that this was injector setting related and that they were potentially not being switched appropriatel?
  2. Hi, I am at the end of an install into a track focussed RX7 with a Link Fury and need some help with a few settings; I have spark but currently no fuel. Specs; 2 rotor 13b with sequential 6 speed Elite gearbox 2 x primary ANSU 90/550 injectors 4 x secondary injectors ANSU 90/550 injectors 4 x AEM ignition coils I am looking for some assistance around Injector settings, the injectors are 11 ohms, I have set it to sequential/staged but currently gives 4 injectors. What do I need to do to add the extra injectors and what settings do I need? I am sure I will need lots more help but would appreciate any assistance to get it running.
  3. thanks all, I will try and report back
  4. Hi having some real issues getting the car to start when cold, it seems to flood out extremely quickly. once running she runs well albeit a bit on the rich side. standard 12at injectors (800cc) I have attached the current map, any help much appreciated thanks chris nov 14 2016.pclr
  5. Hi, Following some teething problems I am now up and running with my Atom on a new installation of a 12a turbo into a Mazda Rx3. Can anyone assist with settings to run only primary injectors?
×
×
  • Create New...